Wastegate rotation flange
#1
Junior Member
Thread Starter
Join Date: Dec 2003
Location: Littleton, CO.
Posts: 463
Likes: 0
Received 0 Likes
on
0 Posts
Wastegate rotation flange
I just bought this rotation flange from ATP turbo so I can reposition my wastegate and route the dumptube differently. The hole on this flange is smaller
( 1/8" smaller all around) than the actual hole on the manifold and the Tial WG. Will this be an issue in terms of the wastgate operating properly since now it seems there won't be as much pressure pushing up on the wastgate due to the smaller hole? Just want to get an unbiased opinion since I already know ATP will say it won't have problems with the wastegate's operation. http://www.atpturbo.com/Mercha...e=BCS
Modified by mrchris1979 at 11:38 PM 6/8/2006
( 1/8" smaller all around) than the actual hole on the manifold and the Tial WG. Will this be an issue in terms of the wastgate operating properly since now it seems there won't be as much pressure pushing up on the wastgate due to the smaller hole? Just want to get an unbiased opinion since I already know ATP will say it won't have problems with the wastegate's operation. http://www.atpturbo.com/Mercha...e=BCS
Modified by mrchris1979 at 11:38 PM 6/8/2006
Thread
Thread Starter
Forum
Replies
Last Post
accordfreak
Forced Induction
6
08-29-2003 03:39 AM