wastegate inquiry
06-19-2003, 08:18 PM
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: Anywhere but here, MI, USA
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
wastegate inquiry
My setup:
ZC Sleeved Fully built, turbo is a t3 for now will be a sc34 soon.
will be running a DSBC stage 1 somewhere between 6-8 psi, stage 2 around 15-17 psi. Will have over 300hp. I'm gonna buy a Tial, but is a 35 mm suffiecient. Or do i need a 38 or 40. Are there HP ranges for each size. Any answers would be greatly appreciated. Thanks
ZC Sleeved Fully built, turbo is a t3 for now will be a sc34 soon.
will be running a DSBC stage 1 somewhere between 6-8 psi, stage 2 around 15-17 psi. Will have over 300hp. I'm gonna buy a Tial, but is a 35 mm suffiecient. Or do i need a 38 or 40. Are there HP ranges for each size. Any answers would be greatly appreciated. Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Slow_boost
Forced Induction
1
05-13-2010 08:07 PM