vitara build help
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2009
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
vitara build help
Ok so first off let me say that i have been searching this but i wanted to ask for honda-tech members opinion on my goals and what parts you would suggest. So heres the ideas im having.
I want to build a vitara set up and im wanting to go for around 300-350hp. I would really like to run e85 and this will all be going in a 91 std hatch. My questions for you are what parts have you guys used to reach this? such as turbo,mani,rods.
So far im planning on using a z6 block,ycp vitara pistons, a y8 head with bisi moto 2.3 cam and supporting mods but thats about as much as ive came up with. This will be my first turbo build and the car is not my daily.
i appreciate the help and sorry if i rambled its really late and ive been looking on here way to long.
I want to build a vitara set up and im wanting to go for around 300-350hp. I would really like to run e85 and this will all be going in a 91 std hatch. My questions for you are what parts have you guys used to reach this? such as turbo,mani,rods.
So far im planning on using a z6 block,ycp vitara pistons, a y8 head with bisi moto 2.3 cam and supporting mods but thats about as much as ive came up with. This will be my first turbo build and the car is not my daily.
i appreciate the help and sorry if i rambled its really late and ive been looking on here way to long.
#3
Honda-Tech Member
Join Date: Sep 2002
Location: ft lauderdale, fl
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: vitara build help
i have a SOHC y8 with a Z6 crank and P2PO vitara's with there custom lenth rods. KMS valvetrain and Crower Turbo Cam P-N-P head. precision 58/57 running 18lbs on on pump 93. I haven't dynoed it yet but it has a nice street tune and with Drag radials i went 12.91@121 @ 2700 with me in it. Oh it's a 4dr and my Daily Driver
just my .02
just my .02
Thread
Thread Starter
Forum
Replies
Last Post