TURBO SETUP QUESTION!
#1
Honda-Tech Member
Thread Starter
Join Date: May 2006
Location: lancaster, pa, US
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
TURBO SETUP QUESTION!
i have a 92 integra ls
when i originally did the turbo setup i was only using an FMU, and a fuel pump, and my stock injectors..
NOW..i have 450cc injectors, and a chipped ecu, I think i'm to rich and the car isn't starting i fouled out like 3 sets of plugs and when i take them out there BLACK and WET after like 2 times trying to start car, and am tired of trying..I still have the FMU hooked up..Would the FMU dump extra fuel when starting the car..or ONLY at boost..?
Also on my car..where do i put the vacuum line from the wastegate on my integra, and also the Blowoff valve.. ?
Right now i have the wastegate to the victor x manifold. and the blow off into what i think is a map sensor on the drivers side firewall..it has a little round top..I need some Help..and HELp i would appreciate..
when i originally did the turbo setup i was only using an FMU, and a fuel pump, and my stock injectors..
NOW..i have 450cc injectors, and a chipped ecu, I think i'm to rich and the car isn't starting i fouled out like 3 sets of plugs and when i take them out there BLACK and WET after like 2 times trying to start car, and am tired of trying..I still have the FMU hooked up..Would the FMU dump extra fuel when starting the car..or ONLY at boost..?
Also on my car..where do i put the vacuum line from the wastegate on my integra, and also the Blowoff valve.. ?
Right now i have the wastegate to the victor x manifold. and the blow off into what i think is a map sensor on the drivers side firewall..it has a little round top..I need some Help..and HELp i would appreciate..
Thread
Thread Starter
Forum
Replies
Last Post
CRVTEC turbo R.C. 310 cc injectors, AEM FPR and rail, 10:1 FMU, inline MSD pump, VAFC..what is wrong
1
Forced Induction
16
12-08-2001 05:08 PM