turbo s2k project finished
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: olympia, washington
Posts: 3,325
Likes: 0
Received 0 Likes
on
0 Posts
turbo s2k project finished
i have been working on my friends s2k recently and i thought i would share the results with you guys...it all started when a local shop convinced my naive friend that he could turbo his s2k with zero tuning or injector upgrades other then a missing link and an fmu...needless to say he destroyed his motor...i rebuilt his engine with the help of a few great companies and he is very very happy with the outcome...the setup is as follows
ENGINE:
-golden eagle sleeves(stock bore)
-pauter rods
-custom arias pistons(10.0:1)
-acl bearings
-rebuilt head with a 5 angle valve job
-supertech springs and retainers
TURBO:
-ebay cast iron log manifold
-3076r
-tial gate
-custom intercooler(garret core)
-3 inch charge piping
-3 inch turbo back custom exhaust
TUNING:
-aem ems
-1000cc injectors
-3 bar map
-walbro 255lph hp
this car is very fun to drive on the street..it spools fast and makes great power
tuned at about 14 lbs on this pull before being pulled back a little to 12-14lbs so it ended up with 475-480 ish on the final tune..he did dyno this car on this dyno when it was na and it made 177whp(the rpm scale is off because they had a problem finding a good source to hook up to)
some pics i took in the process,i got lazy and stopped taking them after a while though lol
here is a pic of the full-race built s2k..they designed their s2k kit using that car
Modified by reactiondc2 at 8:23 PM 12/22/2007
Modified by reactiondc2 at 8:24 PM 12/22/2007
Modified by reactiondc2 at 10:18 PM 12/22/2007
ENGINE:
-golden eagle sleeves(stock bore)
-pauter rods
-custom arias pistons(10.0:1)
-acl bearings
-rebuilt head with a 5 angle valve job
-supertech springs and retainers
TURBO:
-ebay cast iron log manifold
-3076r
-tial gate
-custom intercooler(garret core)
-3 inch charge piping
-3 inch turbo back custom exhaust
TUNING:
-aem ems
-1000cc injectors
-3 bar map
-walbro 255lph hp
this car is very fun to drive on the street..it spools fast and makes great power
tuned at about 14 lbs on this pull before being pulled back a little to 12-14lbs so it ended up with 475-480 ish on the final tune..he did dyno this car on this dyno when it was na and it made 177whp(the rpm scale is off because they had a problem finding a good source to hook up to)
some pics i took in the process,i got lazy and stopped taking them after a while though lol
here is a pic of the full-race built s2k..they designed their s2k kit using that car
Modified by reactiondc2 at 8:23 PM 12/22/2007
Modified by reactiondc2 at 8:24 PM 12/22/2007
Modified by reactiondc2 at 10:18 PM 12/22/2007
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: olympia, washington
Posts: 3,325
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tannerLSt)
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: olympia, washington
Posts: 3,325
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tannerLSt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tannerLSt »</TD></TR><TR><TD CLASS="quote">sweet numbers... next thing to go is the tranny</TD></TR></TABLE>yea he knows to go easy on it haha
Trending Topics
#10
Honda-Tech Member
Join Date: Jan 2003
Location: wa, usa
Posts: 3,274
Likes: 0
Received 0 Likes
on
0 Posts
Re: (90sedan)
<--camera man
I've seen alot of turbo hondas on this specific dyno and I was shocked at the ease at which this car made the power. we're barely scratching the surface of what this motor has potentially. Just wish he had the fuel system to go further.
-Zol
I've seen alot of turbo hondas on this specific dyno and I was shocked at the ease at which this car made the power. we're barely scratching the surface of what this motor has potentially. Just wish he had the fuel system to go further.
-Zol
#11
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: olympia, washington
Posts: 3,325
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boosted94cx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted94cx »</TD></TR><TR><TD CLASS="quote">that muffler's loosing you power spintech is udder crap</TD></TR></TABLE>at this point i find it unlikely that its losing much power due to the muffler,that being said he actually tried to get a burns muffler from a shop and when it arrived it was that vibrant, im already working on him to spring for a realburns stainless muffler
Modified by reactiondc2 at 10:30 PM 12/22/2007
Modified by reactiondc2 at 10:30 PM 12/22/2007
#13
Honda-Tech Member
Join Date: Sep 2007
Location: Olympia, wa, usa
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Re: (140sx)
btw not that i wanted to run a fmu the first time, just a band aid untill i could afford a ems takeing the cheap route the first time usally cost more soon after.
#15
Honda-Tech Member
Kinda high for 14psi IMO
my last s2k i tuned was a built motor gt4088R and it was 515@21 psi on pump gas.
Ive tuned quite a few and that is either the most efficient motor i have ever seen, or that dyno was in "shoot out" mode.
you might wanna ask if it was
my last s2k i tuned was a built motor gt4088R and it was 515@21 psi on pump gas.
Ive tuned quite a few and that is either the most efficient motor i have ever seen, or that dyno was in "shoot out" mode.
you might wanna ask if it was
#17
* B A N N E D *
Join Date: Oct 2004
Location: Orange County, CA, USA
Posts: 8,291
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tannerLSt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tannerLSt »</TD></TR><TR><TD CLASS="quote">sweet numbers... next thing to go is the tranny</TD></TR></TABLE>
Doubt it. The first things are the rear end and axles.
Doubt it. The first things are the rear end and axles.
#19
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: olympia, washington
Posts: 3,325
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mrbsponge)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrbsponge »</TD></TR><TR><TD CLASS="quote">Kinda high for 14psi IMO
my last s2k i tuned was a built motor gt4088R and it was 515@21 psi on pump gas.
Ive tuned quite a few and that is either the most efficient motor i have ever seen, or that dyno was in "shoot out" mode.
you might wanna ask if it was</TD></TR></TABLE>yes i know the numbers are much higher then we expected as well...im not really a dyno numbers benchracer myself but since the owner is unlikely to ever take the car to the track its about the only way the show any gains...this car previously made 177whp on this dyno when it was na obviously it has gained a decent amouint of power since then...also another interesting detail is,the yellow full-race built s2k pictured could only muster 460 at 16lbs with a 35r and tubular manifold as well as a fully ported head......
my last s2k i tuned was a built motor gt4088R and it was 515@21 psi on pump gas.
Ive tuned quite a few and that is either the most efficient motor i have ever seen, or that dyno was in "shoot out" mode.
you might wanna ask if it was</TD></TR></TABLE>yes i know the numbers are much higher then we expected as well...im not really a dyno numbers benchracer myself but since the owner is unlikely to ever take the car to the track its about the only way the show any gains...this car previously made 177whp on this dyno when it was na obviously it has gained a decent amouint of power since then...also another interesting detail is,the yellow full-race built s2k pictured could only muster 460 at 16lbs with a 35r and tubular manifold as well as a fully ported head......
#20
Honda-Tech Member
Join Date: Jan 2003
Location: wa, usa
Posts: 3,274
Likes: 0
Received 0 Likes
on
0 Posts
Re: (reactiondc2)
The yellow S2k is also running under 9:1 compression vs. 10:1 on the black one.
Also, i believe the muffler he has is an Aero Turbine muffler.
-Zol
Also, i believe the muffler he has is an Aero Turbine muffler.
-Zol
#21
Honda-Tech Member
Thread Starter
Join Date: Jan 2004
Location: olympia, washington
Posts: 3,325
Likes: 0
Received 0 Likes
on
0 Posts
Re: (reaction360)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reaction360 »</TD></TR><TR><TD CLASS="quote">The yellow S2k is also running under 9:1 compression vs. 10:1 on the black one.
Also, i believe the muffler he has is an Aero Turbine muffler.
-Zol</TD></TR></TABLE>yea but i have been told that high compression is bad on boosted applications
Also, i believe the muffler he has is an Aero Turbine muffler.
-Zol</TD></TR></TABLE>yea but i have been told that high compression is bad on boosted applications
#22
Honda-Tech Member
Re: (reaction360)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reaction360 »</TD></TR><TR><TD CLASS="quote">The yellow S2k is also running under 9:1 compression vs. 10:1 on the black one.
Also, i believe the muffler he has is an Aero Turbine muffler.
-Zol</TD></TR></TABLE>
9:1 vs 10:1 aint gonna be much difference my bud, maybe a few ft/lbs in tq. but the s2k before that i did, had a 35R on it and on the 1 BAR map sensor(stock) we made 379@12psi on AEM<U>(Mainstream performance got 362@13psi before i tuned it)</U>
I just really think something is up. Im not trying to go starting a pissing contest with anyone but it does seem a bit high. i mean look at the full-race car you talked about.
anyways, good luck with the car they are very fun to drive with HP
so far on our s2k KILL LIST we have, 3 trannys and 2 rear ends. all the s2ks either have the inline pro z32 conversions in em, and rebuilt trannys, i snapped a tailshaft section almost completely off in a 3rd to 4th powershift
Also, i believe the muffler he has is an Aero Turbine muffler.
-Zol</TD></TR></TABLE>
9:1 vs 10:1 aint gonna be much difference my bud, maybe a few ft/lbs in tq. but the s2k before that i did, had a 35R on it and on the 1 BAR map sensor(stock) we made 379@12psi on AEM<U>(Mainstream performance got 362@13psi before i tuned it)</U>
I just really think something is up. Im not trying to go starting a pissing contest with anyone but it does seem a bit high. i mean look at the full-race car you talked about.
anyways, good luck with the car they are very fun to drive with HP
so far on our s2k KILL LIST we have, 3 trannys and 2 rear ends. all the s2ks either have the inline pro z32 conversions in em, and rebuilt trannys, i snapped a tailshaft section almost completely off in a 3rd to 4th powershift
#23
B*a*n*n*e*d
Join Date: Oct 2006
Location: Midwest, WI
Posts: 5,784
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mrbsponge)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrbsponge »</TD></TR><TR><TD CLASS="quote">
9:1 vs 10:1 aint gonna be much difference my bud, maybe a few ft/lbs in tq. but the s2k before that i did, had a 35R on it and on the 1 BAR map sensor(stock) we made 379@12psi on AEM<U>(Mainstream performance got 362@13psi before i tuned it)</U>
I just really think something is up. Im not trying to go starting a pissing contest with anyone but it does seem a bit high. i mean look at the full-race car you talked about.
anyways, good luck with the car they are very fun to drive with HP
so far on our s2k KILL LIST we have, 3 trannys and 2 rear ends. all the s2ks either have the inline pro z32 conversions in em, and rebuilt trannys, i snapped a tailshaft section almost completely off in a 3rd to 4th powershift </TD></TR></TABLE>
I dont think anything is up, I made 424 at the rear wheels on a dynojet 255 @ 9 psi on my s2000 with the full race setup and a gt3076r .82
9:1 vs 10:1 aint gonna be much difference my bud, maybe a few ft/lbs in tq. but the s2k before that i did, had a 35R on it and on the 1 BAR map sensor(stock) we made 379@12psi on AEM<U>(Mainstream performance got 362@13psi before i tuned it)</U>
I just really think something is up. Im not trying to go starting a pissing contest with anyone but it does seem a bit high. i mean look at the full-race car you talked about.
anyways, good luck with the car they are very fun to drive with HP
so far on our s2k KILL LIST we have, 3 trannys and 2 rear ends. all the s2ks either have the inline pro z32 conversions in em, and rebuilt trannys, i snapped a tailshaft section almost completely off in a 3rd to 4th powershift </TD></TR></TABLE>
I dont think anything is up, I made 424 at the rear wheels on a dynojet 255 @ 9 psi on my s2000 with the full race setup and a gt3076r .82
#25
Honda-Tech Member
Join Date: Sep 2007
Location: Olympia, wa, usa
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Re: (reactiondc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by reactiondc2 »</TD></TR><TR><TD CLASS="quote">but since the owner is unlikely to ever take the car to the track.....</TD></TR></TABLE>
just wait till it opens up... get that 2 step set up, and there are going to be diff guts flying EVERYWHERE
just wait till it opens up... get that 2 step set up, and there are going to be diff guts flying EVERYWHERE