Troubleshooting: another Turbo b16 that won’t start
07-14-2018, 06:39 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2018
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Troubleshooting: another Turbo b16 that won’t start
Ok guys just finished putting my b16 together so here it is.
Went to start it last night first uploaded a base map with the dead times (Id1700cc injectors) and 4 bar map to get it to start , firing order is correct on dizzy, timing is dead on, i know it’s getting fuel bc the plugs were wet, it also wants to start if i feather the gas peddle but then dies after a few secs. It’s a new build so i didn’t want to wash the rings. I guess I’ll start with new plugs today after work and go from there. Any help would be greatly appreciated
Went to start it last night first uploaded a base map with the dead times (Id1700cc injectors) and 4 bar map to get it to start , firing order is correct on dizzy, timing is dead on, i know it’s getting fuel bc the plugs were wet, it also wants to start if i feather the gas peddle but then dies after a few secs. It’s a new build so i didn’t want to wash the rings. I guess I’ll start with new plugs today after work and go from there. Any help would be greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post