I'm looking to get the TD05 (greddy sohc turbo) oil feed fitting.

When i bought my turbo it didn't come with the fitting.

I was told that the oil feed fitting was = 7/16th - 24 thread pitch.

I can't find the right size banjo and banjo bolt.



Don't really know what to do at this point. Anyone know of anyone selling

oil feed kits. Or know where to find this damn banjo, and bolt??

I've went to 2 places already to get this part, and noone can really help me.

 

Contact Flamenco T, he will hook you up and the part will arrive before you even notice it . Just let him know what turbo you have and he'll send you a complete kit without any worries about missing parts.

I'm pretty sure everyone else who has delt with him will agree with me.

 

I do offer a complete oil feed line kit for TD05's.

They're $ 45 shipped and it comes compelte even with the correct BSPT adapter to match the thread on the block and the fitting on your turbo.





Stan
214-783-7247

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Flamenco-T &raquo;</TD></TR><TR><TD CLASS="quote">They're $ 45 shipped and it comes compelte even with the correct BSPT adapter to match the thread on the block and the fitting on your turbo.</TD></TR></TABLE>

Hey Stan, I have a question for you...why does Greddy include only 1/8" npt fittings with their kits, including the block fitting?

The part list that comes with the kits specifies the unions as "1/8 pt". I assume that's 1/8" NPT right? Was it a typo? I remember hearing that Japan uses "pt" for something - either BSPT or NPT.

- Slater

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Slater &raquo;</TD></TR><TR><TD CLASS="quote">

Hey Stan, I have a question for you...why does Greddy include only 1/8" npt fittings with their kits, including the block fitting?

The part list that comes with the kits specifies the unions as "1/8 pt". I assume that's 1/8" NPT right? Was it a typo? I remember hearing that Japan uses "pt" for something - either BSPT or NPT.
- Slater</TD></TR></TABLE>

The block on honda uses BSPT threads, you can thread an NPT but you're risking of cross threading the threads since NPT have 27 threads per inch while BSPT have finer threads than the NPT.

I am not sure what greddy include with their turbo kits, but I have always inlcude the BSPT adapter and the correct inverted flare or metric to the turbo.

stan

 

alright sounds good.

The fitting will fit the turbo though? Ive went everywhere to find the fitting.