T3 turbo Spools but doesnt go?
#1
Thread Starter
Join Date: Dec 2001
Location: St. Petersburg, Fl, usa
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
T3 turbo Spools but doesnt go?
Here is my problem. I have a b18b and a t3 turbo on it. In the low rpms when I give it gas it doesnt go anywhere but it sounds like its spooling like crazy(Loud), but when I give it full throttle it goes after a terriblew transition. Any ideas what is wrong? 6 pounds of boost.It works fine abouve 4000 rpms. I would expect this from a biger turbo but a t3?
#6
Honda-Tech Member
Re: T3 turbo Spools but doesnt go? (SpoonDC4)
>>I have a b18b and a t3 turbo on it. In the low rpms when I give it gas it doesnt go anywhere but it sounds like its spooling like crazy(Loud), but when I give it full throttle it goes after a terriblew transition. Any ideas what is wrong?<<
Sounds like a fuel issue to me. What's your fuel setup? I'm running filetofit's maplimiter and 450 DSM injectors, with no blue box... Sometimes at part throttle, I can build boost but the car is very "laggy" and my A/F guage goes dead lean for just a second. This only happens when I give just enough throttle to reach 5-6 psi. At full throttle this never happens. My condition is not consistent, and sounds like it's not nearly as bad as yours (mine is OBD2 btw...). Anyone wanna speculate why this is happening?
Sounds like a fuel issue to me. What's your fuel setup? I'm running filetofit's maplimiter and 450 DSM injectors, with no blue box... Sometimes at part throttle, I can build boost but the car is very "laggy" and my A/F guage goes dead lean for just a second. This only happens when I give just enough throttle to reach 5-6 psi. At full throttle this never happens. My condition is not consistent, and sounds like it's not nearly as bad as yours (mine is OBD2 btw...). Anyone wanna speculate why this is happening?
Trending Topics
#10
Join Date: Dec 2001
Location: Long Island, NY, USA
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 turbo Spools but doesnt go? (SpoonDC4)
alotta pple here would say the delta sucks and to ditch it and get a tial but i dont have any personal experience there. you have the gauge right? can you take pic of your setup and connections?
#11
Re: T3 turbo Spools but doesnt go? (Pengo)
i think its really not fully spooled.. prolly its turbo lag.. and most likely its bad fuel curve...i have that on my civic.... that FMU **** doesnt work very well.. maybe a bad manifold to collector design...
[Modified by romeo619romeo, 6:29 AM 2/26/2003]
[Modified by romeo619romeo, 6:29 AM 2/26/2003]
#12
Re: T3 turbo Spools but doesnt go? (SpoonDC4)
I agree with fsp 31- it's most likely a fuel issue... no way a T3 is going to be that laggy on a B18b. Do you have an A/F monitor? I'm guessing that you're running either way too rich or way too lean at tip in / low throttle...
#13
Thread Starter
Join Date: Dec 2001
Location: St. Petersburg, Fl, usa
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 turbo Spools but doesnt go? (turbopimp)
Its a 12-1 fmu and stock injectors with an inline pump. How would this be way rich or way lean in the low rpms?
#14
Honda-Tech Member
Join Date: Sep 2002
Location: ......, va
Posts: 516
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 turbo Spools but doesnt go? (SpoonDC4)
Might be a leak in your charge pipes. Had the same problem. Turbo would spools but would go into boost. Found out the next morning ,that I blew off one of my charge pipes.
#15
Honda-Tech Member
Join Date: Feb 2000
Location: Milwaukee, WI
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 turbo Spools but doesnt go? (SpoonDC4)
Its a 12-1 fmu and stock injectors with an inline pump. How would this be way rich or way lean in the low rpms?
So @ 2psi (example psi @ low rpms), you already have an extra 24psi of fuel pressure on top of your base pressure. Too much fuel can "extinguish" the combustion, hence the low output relative to boost pressure.
Easiest way to find out is to dyno tune with a wideband O2. You'll definitely find out if it's rich or lean throughout your powerband.
#16
Re: T3 turbo Spools but doesnt go? (98CTRCoupe)
i'm having the same problem turbo spool but not go anywhere feels lacky and boggling 3000rpm under feels like hiting breack wall sometimes.
could it be the injectors too, i have rc 440cc do they go bad quick? didn't have them for that long.
could it be the injectors too, i have rc 440cc do they go bad quick? didn't have them for that long.
#17
Re: T3 turbo Spools but doesnt go? (luckypon7)
feels lacky and boggling 3000rpm under feels like hiting breack wall sometimes.
Thread
Thread Starter
Forum
Replies
Last Post