T3 Turbine Bolt Patterns
10-26-2002, 10:21 PM
#1
Thread Starter
Join Date: Apr 2002
Location: Greensboro, NC, US
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
T3 Turbine Bolt Patterns
I've spent the past hour searching here and on the net, but can't find anything, so forgive me with this has been covered, but...
I thought that there was only 1 style of 5 bolt patterns for T3 Turbine Housings, but I now have a .48ar Turbine Housing from a T-bird Turbocoupe, and a swing valve assembly off of ebay, and the Housing is about a centimeter shorter then the swing valve assembly? wtf?
I thought that there was only 1 style of 5 bolt patterns for T3 Turbine Housings, but I now have a .48ar Turbine Housing from a T-bird Turbocoupe, and a swing valve assembly off of ebay, and the Housing is about a centimeter shorter then the swing valve assembly? wtf?
10-28-2002, 11:53 AM
#2
Join Date: Sep 2002
Location: Philadelphia, PA, USA
Posts: 3,104
Likes: 0
Received 0 Likes
on
0 Posts
Re: T3 Turbine Bolt Patterns (johnisenglish)
there is a 4 bolt and 5 bolt. the thunderbird uses the 5bolt so any bigger kit you will use for the turbo the downpipe wont fit.
cheapturbo.com has the 5 bolt flange so you can go external. you just weld the flapper shut and make a custom dp utilizing that flange.
hope that helps
cheapturbo.com has the 5 bolt flange so you can go external. you just weld the flapper shut and make a custom dp utilizing that flange.
hope that helps
Thread
Thread Starter
Forum
Replies
Last Post
austrian type-R
Forced Induction
2
09-19-2003 08:58 AM
H22coupe
Forced Induction
3
11-20-2002 01:59 PM
