djnikko

As the title says. Im looking for a turbo to suit my built 9:0:1 CR h22. I currently have a T3 and think its way too small but may be anough to get me started. I was searching other posts and it suggested T3/T04 or t3/T04e. I thought i'd do a quick ebay search for info but could only see t3/t4's.

Could someone also tell me if the above turbos all have a T3 flange, im guessing they do but just need conformation.

Is there any informative sites on turbo specs etc. Some of the previous posts on this site do not have precise information

Any help would be great, thanks

non-VTEC

the "t3/t4" is the same thing as a t3/t04. everyone says t3/t4 for whatever reason.

the only thing you need to decide on is what t3/t04 you want......there are MANY diffrent combinations of that turbo family. you need to have a certain power level/goal you hope to achieve then you can decide what turbo to choose.

djnikko

Ah ok thanks that makes sense. Im after 390hp to the wheels from a h22 do you know how I can go about which turbo to choose? Is there any sites with info to guide me

djnikko

bump on up!

What turbo can I use to gain just a little under 400hp on a H22A engine? T3/T4 seems to be the way forward with these engines or T3 SC61

TTT

I have a couple of turbo combos that would work for you.

t3/t4 57 trim with P trim turbine wheel
Borg-warner S200

Either one of these turbos.. (or something bigger) would get you to your goal.

Schister66

i'd go for the Borg Warner S200....its spendy, but i'd say between the two options, it is by far the better one