Are T3 compressor housings swap-able?
#1
Member
Thread Starter
Join Date: Jun 2002
Location: NE Of Metro Area, MN, US
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
Are T3 compressor housings swap-able?
Hey all,
Are all T3 compressor housings swap-able? I know there are different A/R's and what not, but if I need to replace my .60 compressor housing, cant I just get any other .60 compressor housing from s T3 and it will work?
Are all T3 compressor housings swap-able? I know there are different A/R's and what not, but if I need to replace my .60 compressor housing, cant I just get any other .60 compressor housing from s T3 and it will work?
#3
Honda-Tech Member
Join Date: Aug 2002
Location: ashEVILle, NC, USSR
Posts: 4,417
Likes: 0
Received 0 Likes
on
0 Posts
Re: Are T3 compressor housings swap-able? (WebGeek)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WebGeek »</TD></TR><TR><TD CLASS="quote">Hey all,
Are all T3 compressor housings swap-able? I know there are different A/R's and what not, but if I need to replace my .60 compressor housing, cant I just get any other .60 compressor housing from s T3 and it will work?</TD></TR></TABLE>
If OEM .60 T3, yes you can. The .52 AR compressor housing off of the 84-87 300ZX will fit over the other OEM .60, and is desireable because of the slip fittings on the compressor inlet/outlet, as opposed to the bolt on fittings the Ford stuffs have.
Are all T3 compressor housings swap-able? I know there are different A/R's and what not, but if I need to replace my .60 compressor housing, cant I just get any other .60 compressor housing from s T3 and it will work?</TD></TR></TABLE>
If OEM .60 T3, yes you can. The .52 AR compressor housing off of the 84-87 300ZX will fit over the other OEM .60, and is desireable because of the slip fittings on the compressor inlet/outlet, as opposed to the bolt on fittings the Ford stuffs have.
#4
Member
Thread Starter
Join Date: Jun 2002
Location: NE Of Metro Area, MN, US
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the replies. I just got my IC back from the machine shop that welded the entanks on for me.. they are making me some flanges so I can use that ford turbo
Thread
Thread Starter
Forum
Replies
Last Post