I have a few Brand New Garrett T3/60-1's in stock. They are ready to ship. Limited Stock! $625.00


Here are the specs:

.63 A/R
Stage III

.70 A/R
60-1

Email me @ louisanaya@hotmail.com

 

All I have are 13 of these turbos.

 

are these supposed to be water cooled?

 

No, they are not water cooled. They do have the 360* Thrust Bearing and have the newer 4 bolt turbine discharge flange!

 

ttt

 

How much power will the turbo be able handle? Cuz i'm debating between the t3 and a straight t4. Which one would be better for 500+ hsp?

 

got a question.. What motor displacement would you recommend for this turbo? (@85-90% VE; 8k rpm)

 

The T3/60-1 with a .82 A/R housing will easily support 500+ whp.

 

What kind of power are you looking at producing?

 

Me personally have a t3/t04e turbo but with a an ar of .57, I want to make around 350 or so horsepower and I'm not sure if I will beable to hit this with this particular turbo so i'm thinking of a t3.

Lee

 

Well, the 57 trim compressor wheel in a .60 A/R T04E compressor housing should be able to support 350 whp without any problems. I am assuming you have a .63 A/R T3 turbine housing with a Stage III Turbine. That turbo will support the power you are looking at producing.

 

Ok, thanks alot that works for me.

Lee

 

No problem!

 

That's a straight bolt on for the t3/t4 Revhard tubular manifold right? Also will it be the same price for the .82 a/r? thanks

 

You are correct on both!

 

Thanks, Ill let you know when im ready to buy.

 

Just let me know! I only have 5 more left!

 

All I have left are T3/60-1's w/ .82 A/R housings.

 

with that spec on the turbo where will it spool on a B18 with stock 81 mm bore or a built 84 mm bore with. And how much whp will i be able to produce

 

You won't have full boost until at least 4500-4800 rpms. The .82 A/R housing will be able to support 500 whp.