i have a built d16 pistons,rods,cam,intake manifold what i was wondering is can i spool up a t3 60-1 on this setup and when will it start to spool im planning on running 20psi or better

 

i think its too big you wont get it going till like 6k rpms in my opinion

 

depends on the turbine side specs. theres a big difference between a .48ar with a stage 1 wheel and a .82ar stage with a stage 5 wheel

 

with which turbine will it spool up better .48 .63 .82

 

.48 but it will be restrictive up top

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99B16Si &raquo;</TD></TR><TR><TD CLASS="quote">.48 but it will be restrictive up top</TD></TR></TABLE>

you can still make 400+ hp on a smaller t3t4 that will have better response on the street

 

there are a lot better choices out there....