i was thinking about buying a t3/gt40 compressor a/r .70 exhuast a/r.82. is this turbi to big for my built h22? will it be real laggy?

 

What kind of HP level will this turbo support

 

It's the same thing as an SC61, although comes standard with a Stage III turbine wheel instead of the Stage V. I'd guess with the .82 hot side it could probably support around 600 WHP.

 

I run one on my D16, so you will have no problem spooling one on your H22. I'd go with the SC61 and get the stage 5 wheel as it would be better suited for your displacement. The main reason why I choce the T3/T61 over the SC61, stage 3 is better for my 1.6L.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turboEGhatch &raquo;</TD></TR><TR><TD CLASS="quote">It's the same thing as an SC61, although comes standard with a Stage III turbine wheel instead of the Stage V. I'd guess with the .82 hot side it could probably support around 600 WHP.</TD></TR></TABLE>

If that's the case I would just get the GT35R and call it a day. Good spool time and very streetable. And it ca support a little over 600whp

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Fitti &raquo;</TD></TR><TR><TD CLASS="quote">

If that's the case I would just get the GT35R and call it a day. Good spool time and very streetable. And it ca support a little over 600whp</TD></TR></TABLE>

And double the price.......

 

so just go with a standard GT35 it still should make about the same hp level