T25 Thread sizes for stock Oil Lines
#1
Thread Starter
Join Date: Jun 2002
Location: Chicago, IL, USA
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
T25 Thread sizes for stock Oil Lines
Anyone know what the thread type is and size and all for the stock oil line fitting on a T25 off of an second gen. Either one, the one on the stock oil line, or directly into the housing, I just need to find out what I need on the end of my feed line.
Thanks
Jim
Thanks
Jim
#2
Re: T25 Thread sizes for stock Oil Lines (jwork101)
Its a special metric fitting that you will probably not find anywhere, I have done many custom DSM turbo setups, the best way to get that fitting is go to the dealer and get that banjo bolt with oil feed line.
Another option is to tap out that fitting for an -AN fitting
Jeff
Another option is to tap out that fitting for an -AN fitting
Jeff
#3
Junior Member
Join Date: Jan 2003
Location: BC, Canada
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Re: T25 Thread sizes for stock Oil Lines (AbaZ)
Hi, this is my stock hard oil line connected to my T25.
Since everyone says that if I were to use a male fitting to thread directly into the T25 the threads are 7/16" inverted flare. Since I need a female fitting, can I use this brake adapter -3AN male to 7/16" female Inverted Flare ?:
EAR-989549
Since everyone says that if I were to use a male fitting to thread directly into the T25 the threads are 7/16" inverted flare. Since I need a female fitting, can I use this brake adapter -3AN male to 7/16" female Inverted Flare ?:
EAR-989549
#5
Honda-Tech Member
Join Date: May 2002
Location: Small Town, KY, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: T25 Thread sizes for stock Oil Lines (phresh_5)
Simple...
XRP fitting (like Earl's) - get the 7/16 IF to AN4 (inverted flare - like mentioned
above) and then get AN4 line...I used a 90 degree fitting (AN4 female - male
swivel) and works perfect...don't forget a washer if anyone plans on doing this.
Jason
https://honda-tech.com/zerothread?id=429527
XRP fitting (like Earl's) - get the 7/16 IF to AN4 (inverted flare - like mentioned
above) and then get AN4 line...I used a 90 degree fitting (AN4 female - male
swivel) and works perfect...don't forget a washer if anyone plans on doing this.
Jason
https://honda-tech.com/zerothread?id=429527
#6
Honda-Tech Member
Join Date: May 2002
Location: Small Town, KY, USA
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: T25 Thread sizes for stock Oil Lines (NosajCivic)
One more thing, if you plan on fittings for the water lines, they are 14.5mm I believe...pretty easy to get - barbs, etc...
The 14B has a different fitting - Use the solex/dellorto carb fitting from Earls,
XRP... M12.5 for the oil inlet
The oil outlet is not threaded...
The 14B has a different fitting - Use the solex/dellorto carb fitting from Earls,
XRP... M12.5 for the oil inlet
The oil outlet is not threaded...
Thread
Thread Starter
Forum
Replies
Last Post
How much oil is coming out of the oil feed line and how fast? and if my return is the same size as t
seeeya04
Forced Induction
3
12-07-2005 01:18 PM