stock sleeves?
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Salem, OR, 97305
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
stock sleeves?
ok heres the deal i just turboed my b18c1 and i and currently running 9 psi to it on pump gas. i managed to get 249.3whp and 175 ft/lbs of torque. i was wondering how much more boost/ hp i can put to the stock sleeves and pistons. heres me setup:
t3/t4 57 trim .63 a/r hotside
custom ramshorn manifold
38mm external wastegate on 9 lb spring
hondata s300
880 precision injectors
msd ignition
intank 255 walbro fuel punp
keep in mind i am running stock pistons and sleeves. i heard that stock sleeves can handle up to 400hp. not sure if thats true or not. any help will be greatly appreciated........
t3/t4 57 trim .63 a/r hotside
custom ramshorn manifold
38mm external wastegate on 9 lb spring
hondata s300
880 precision injectors
msd ignition
intank 255 walbro fuel punp
keep in mind i am running stock pistons and sleeves. i heard that stock sleeves can handle up to 400hp. not sure if thats true or not. any help will be greatly appreciated........
#3
been there done that
iTrader: (1)
Re: stock sleeves? (1TurboHatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1TurboHatch »</TD></TR><TR><TD CLASS="quote">I wouldnt push it past 300whp with the stock bottom end. </TD></TR></TABLE>
you wouldnt, but lots of people have and dont have any problems.
to the OP, what's the condition of your engine?
you wouldnt, but lots of people have and dont have any problems.
to the OP, what's the condition of your engine?
#4
Re: stock sleeves? (doood)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by doood »</TD></TR><TR><TD CLASS="quote">
you wouldnt, but lots of people have and dont have any problems.
to the OP, what's the condition of your engine?</TD></TR></TABLE>
True. but its not worth the risk IMO.
you wouldnt, but lots of people have and dont have any problems.
to the OP, what's the condition of your engine?</TD></TR></TABLE>
True. but its not worth the risk IMO.
#5
Honda-Tech Member
Re: stock sleeves? (1TurboHatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1TurboHatch »</TD></TR><TR><TD CLASS="quote">
True. but its not worth the risk IMO. </TD></TR></TABLE>
Whats the risk ? A b18c1 can handle 300hp no problem, all in the tune.
True. but its not worth the risk IMO. </TD></TR></TABLE>
Whats the risk ? A b18c1 can handle 300hp no problem, all in the tune.
#6
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: Salem, OR, 97305
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Re: stock sleeves? (doood)
the motor has seen nitrous last race season about 80 shot and has been through a couple of seasons all motor yea she has been around but this thing has never let me down she keeps pulling hard and still has good compression x4.
Thread
Thread Starter
Forum
Replies
Last Post
Turboteggy
Forced Induction
31
01-13-2004 07:28 PM