Spy Pictures
looks real nice so far. im sure itll make some sick power when you
Thread Starter
Member
Joined: Dec 2002
Posts: 1,901
Likes: 0
From: Come to the, DarkSide
Re: Spy Pictures (Boostfed)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed »</TD></TR><TR><TD CLASS="quote"> 
Very Impressive! That Lovefabd Sidewinder definately looks nice with the Coating on it! Did RLZ do the coating? Is Brad porting your head? Mine is ALMOST done WOOOHOOO!!!!!!!! Good luck on the project and hope to see some dyno #s and track times. What is it going in?</TD></TR></TABLE>
RLZ had someone else do the coating. Yeha brad ported my head a while back. Yeha i wanted to use differenet Rods but Brad got me to use them so i am.
This is going to be my street car. So everything in it is Meant for the street.
Very Impressive! That Lovefabd Sidewinder definately looks nice with the Coating on it! Did RLZ do the coating? Is Brad porting your head? Mine is ALMOST done WOOOHOOO!!!!!!!! Good luck on the project and hope to see some dyno #s and track times. What is it going in?</TD></TR></TABLE>RLZ had someone else do the coating. Yeha brad ported my head a while back. Yeha i wanted to use differenet Rods but Brad got me to use them so i am.
This is going to be my street car. So everything in it is Meant for the street.
Thread Starter
Member
Joined: Dec 2002
Posts: 1,901
Likes: 0
From: Come to the, DarkSide
Re: Spy Pictures (Mikes01GSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mikes01GSR »</TD></TR><TR><TD CLASS="quote">What kind of snail is going on this soon b evil bitch.</TD></TR></TABLE>
SC63 is my snail.
SC63 is my snail.
Honda-Tech Member
Joined: Oct 2002
Posts: 1,206
Likes: 1
From: Winchester, Va
Re: Spy Pictures (Soon_2b_evil)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soon_2b_evil »</TD></TR><TR><TD CLASS="quote">Sorry about the Oil on the vavle cover, didnt clean it.
Thanks Art. i didnt think anyone would know it was a Dart Block.
im not running corrillo's
Im running the Eagles with the upgraded bolts or the new standards bolts and wiseco pistons.</TD></TR></TABLE>
You should be fine with the eagles until you start pushing past 600whp.....the pic isnt showing up but since your using the Eagles with the CA bolts your probably running the 95mm stroke.....just be careful on the tune...and watch the Rod bearings closely. The big end doesnt hold its shape past 600whp when your turning it past 9K. Other than that its all good. Even with making close to 800whp with them it was scary. The rod bearings would last 2-3 runs before needing to be changed.
Thanks Art. i didnt think anyone would know it was a Dart Block.
im not running corrillo's
Im running the Eagles with the upgraded bolts or the new standards bolts and wiseco pistons.</TD></TR></TABLE>
You should be fine with the eagles until you start pushing past 600whp.....the pic isnt showing up but since your using the Eagles with the CA bolts your probably running the 95mm stroke.....just be careful on the tune...and watch the Rod bearings closely. The big end doesnt hold its shape past 600whp when your turning it past 9K. Other than that its all good. Even with making close to 800whp with them it was scary. The rod bearings would last 2-3 runs before needing to be changed.
Thread
Thread Starter
Forum
Replies
Last Post
InDub
For Sale
15
May 19, 2008 02:51 PM