http://cgi.ebay.com/ebaymotors...33615

 

dayam I wonder how much the reserve is

 

Oh yeah? This is way better:

http://cgi.ebay.com/ebaymotors...=5335


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ebay Jackass &raquo;</TD></TR><TR><TD CLASS="quote">k&n typhoon intake system with areospeed filter (note the tricked out passengers bright light taken out for direct ram), and many aftermarket interior ad ons (yet not to much to make it cluttered), window pillar guage pod mounted with air/fuel ratio monitor and water temp monitor.THIS VEHICLE HAS BEEN TUNED AND DYNOED AT 197 BHP BY A SPOON ENGINERING REP. THE PERFECT SLEEPER STYLE.....NO ONE WILL NOTICE TILL YOU GIVE IT WHAT ITS GOT!!!!
</TD></TR></TABLE>


Sorry to jack your thread, but I didn't want to start a new one to make fun of this

 

screw that, you could get that motor build for under 10 grand

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by genop &raquo;</TD></TR><TR><TD CLASS="quote">screw that, you could get that motor build for under 10 grand</TD></TR></TABLE>
I think thats the point of the auction.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ricodemus &raquo;</TD></TR><TR><TD CLASS="quote">THIS VEHICLE HAS BEEN TUNED AND DYNOED AT 197 BHP BY A SPOON ENGINERING REP. THE PERFECT SLEEPER STYLE.....NO ONE WILL NOTICE TILL YOU GIVE IT WHAT ITS GOT!!!! </TD></TR></TABLE>

its such a sleeper nobody will notice even when you get on it. thats the perfect sleeper!

 

Yep, looks like a monster alright!

 

LOL. Now how do you guys know a stock LS with a cone filter on a pipe can't make 197 hp!

I guess he flew one of those Spoon guys out from Japan for the tuning

 

yeah, I emailed that guy and called him an *******, etc. I've been frustrated trying to buy a car lately and I'm tired of being mislead. I don't want it to happen to others either. I also wrote a nasty email to a place that was selling a 90-93 ls integra and talked about the vtec in the description. jerk-offs.

 

lookes like the same engine that was taken off ebay a couple weeks ago.. asking price then was 17,000... hmm..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92HB_HB &raquo;</TD></TR><TR><TD CLASS="quote">lookes like the same engine that was taken off ebay a couple weeks ago.. asking price then was 17,000... hmm..</TD></TR></TABLE>

That's crazy....like someone else said you could get that thing built for less than that!

 

That exact motor was in an enginee build up in April HondaTuning ( I know I'm a ricer)

 

the guy with the 197hp ls emailed me back and said

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dipshit &raquo;</TD></TR><TR><TD CLASS="quote">hey idiot i have done a little work to the heads, and i have the dyno sheets
to prove what i have done.
</TD></TR></TABLE>

 

You CANNOT build that motor for less than 10K, you must be a moron to even think that.

Dart Block - $2000
CP Pistons - $700
Pauter Rods - $700
Eagle Crank - $700
Dry Sump Oiling System - $1200+
Head and Porting - $1500+
Ferrea Roller Rockers, and complete Valvetrain - $2500+
Turbo Kit - $5000+
All the fittings on there alone must be almost $1000

That's $15,300 right there alone. And I'm being consevative with those numbers. Not to mention injectors, fuel rail, intake manifold, throttlebody, oil pan, bearings, waterpump, seals, engine assembly and machine shop work and tons of other misc parts..

Duh, i can do it for 10k or less ...you could probably make an LS motor with a cone filter and 198whp, tuned by spoon maybe.

Now could you make more power, with less exotic and more affordable parts..sure could.

 

I'd hit it.
Mines looks very similar
wet sump though

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MaxBoost &raquo;</TD></TR><TR><TD CLASS="quote">You CANNOT build that motor for less than 10K, you must be a moron to even think that.

Dart Block - $2000
CP Pistons - $700
Pauter Rods - $700
Eagle Crank - $700
Dry Sump Oiling System - $1200+
Head and Porting - $1500+
Ferrea Roller Rockers, and complete Valvetrain - $2500+
Turbo Kit - $5000+
All the fittings on there alone must be almost $1000

That's $15,300 right there alone. And I'm being consevative with those numbers. Not to mention injectors, fuel rail, intake manifold, throttlebody, oil pan, bearings, waterpump, seals, engine assembly and machine shop work and tons of other misc parts..

Duh, i can do it for 10k or less ...you could probably make an LS motor with a cone filter and 198whp, tuned by spoon maybe.

Now could you make more power, with less exotic and more affordable parts..sure could.


</TD></TR></TABLE>

dont forget, the reserve is not met yet. he may want 20k for this setup. it all loosk good on paper but i bet its a scam

 

I know that the reserve is not met yet, I was just replying to the guy that said it wasn't worth it and that you could build the motor for less then $10,000 which you clearly cannot.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MotorMatrix.com &raquo;</TD></TR><TR><TD CLASS="quote">

dont forget, the reserve is not met yet. he may want 20k for this setup. it all loosk good on paper but i bet its a scam</TD></TR></TABLE>

yes im beting this also, i bet the motor wasnt built properly or something.. something has to be wrong with it