semi engine build

Thread Tools
 
Search this Thread
 
Old Oct 15, 2004 | 07:12 AM
  #1  
integratuner94's Avatar
Thread Starter
Honda-Tech Member
 
Joined: Mar 2004
Posts: 49
Likes: 1
From: Fremont, OH, US
Default semi engine build

This past summer i installed a turbo kit on my 94 integra LS. It has about 115k on it. Right now everything is running fine. I would like to have the motor be able to handle a little more boost along with being a stonger motor in general. If I got a Cometic headgasket, Golden Eagle block guard, Eagle rods, Arias pistons, and ARP head studs, how much boost would that be able to handle. I realize that getting the block sleeved would be a better route, but right now I'd like to see how much I can throw at my engine with a built bottom end with the stock sleeves in it. Thanks for your time.

Adam
Reply
Old Oct 15, 2004 | 08:25 AM
  #2  
Boosted2K's Avatar
Junior Member
 
Joined: Aug 2004
Posts: 557
Likes: 0
From: Copperas Cove, TX
Default Re: semi engine build (integratuner94)

I know that Jeff over at (boosted-hybrid.com) has done 400whp+ on stock sleeves, with the right fuel managment of course. However I'm a ***** and will only tune to around 350 or so, but I always put reliability before power.
Reply
Old Oct 15, 2004 | 08:49 AM
  #3  
m R g S r's Avatar
Honda-Tech Member
 
Joined: Jun 2003
Posts: 9,555
Likes: 0
From: NYC bitchessss
Default Re: semi engine build (integratuner94)

There have been a few who made 500whp, or very close to it on here.
Full Race Geoff
Evo Hybrid
have both made over 500
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
417greenmachine
Forced Induction
12
Oct 12, 2015 09:53 PM
Spody02
Forced Induction
33
Jun 12, 2008 11:10 AM
CD7 - Germany
Honda Accord (1990 - 2002)
4
Feb 12, 2004 05:20 AM
B18C GSR CIVIC
Forced Induction
15
Oct 23, 2003 07:21 PM
Trajic
Forced Induction
2
Aug 22, 2001 02:35 PM




All times are GMT -8. The time now is 09:42 AM.