??'s about Fast-Turbo SS fuel line kit
08-30-2005, 06:45 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Location: Knoxville, TN, U.S.
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
??'s about Fast-Turbo SS fuel line kit
I just got my Fast-Turbo Fuel line kit along with my Aeromotive FPR and Golden Eagle fuel rail from Stan 
and I have a question about what I need to put on the fittings so they don't leak. I know I can't use white teflon tape and I was even told that I shouldn't even use yellow teflon. What do I need to use on these fittings just to ensure they don't leak?. Thanks
BTW, this fuel line kit is very top notch, thanks again stan.
Mike
and I have a question about what I need to put on the fittings so they don't leak. I know I can't use white teflon tape and I was even told that I shouldn't even use yellow teflon. What do I need to use on these fittings just to ensure they don't leak?. ThanksBTW, this fuel line kit is very top notch, thanks again stan.
Mike
08-30-2005, 08:44 PM
#2
Honda-Tech Member
Join Date: Mar 2005
Location: Nor Cal
Posts: 878
Likes: 0
Received 0 Likes
on
0 Posts
Re: ??'s about Fast-Turbo SS fuel line kit (speedy108)
For the threaded (NPT) fittings that you use: Thread lubricant or anti-seize.
For the AN fittings (the 37 degree ones): Viton O-rings to seal.
Jason
For the AN fittings (the 37 degree ones): Viton O-rings to seal.
Jason
Thread
Thread Starter
Forum
Replies
Last Post
Nextelbuddy
Forced Induction
5
01-30-2004 07:56 AM
