RSR GT2 Turbo Application
06-15-2005, 02:16 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2004
Location: The Gray
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
RSR GT2 Turbo Application
My original plan was to have 2.5'' custom mandrel piping, with my own muffler. My brother was accidently shipped the wrong exhaust (the GT2 instead of the EX-Mag) so now we have the GT2 sitting in our garage for no one to use.
He still wants the EX-Mag, so our options are to send the GT2 back or me use it for turbo. Since the GT2 has 60mm piping, it's a tad smaller than 2.5'' BUT, on my G2 Integra the routing of the piping is rather hectic. The GT2 has only 1 bend in it.
My thoughts are since it's only 1 bend as opposed to about 3-4 wouldn't this basically equal out to the flowing of a 2.5''?
He still wants the EX-Mag, so our options are to send the GT2 back or me use it for turbo. Since the GT2 has 60mm piping, it's a tad smaller than 2.5'' BUT, on my G2 Integra the routing of the piping is rather hectic. The GT2 has only 1 bend in it.
My thoughts are since it's only 1 bend as opposed to about 3-4 wouldn't this basically equal out to the flowing of a 2.5''?
06-15-2005, 02:17 PM
#2
Thread
Thread Starter
Forum
Replies
Last Post
blackriceman
Honda Accord (1990 - 2002)
10
05-05-2004 06:41 PM
