<Rod lengths, crank stroke, piston size, and sleeves?
09-18-2003, 07:12 PM
#1
Thread Starter
Join Date: Sep 2003
Location: Las Vegas, NV, USA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
<Rod lengths, crank stroke, piston size, and sleeves?
I'll start with a yes or no question, I think. Do all stock B blocks have sleeves?
Then what a B series rod lengths, crank strokes, and pistons sizes. Any good links will even be sweet. lS/vtec 350bwhp(i hope)maybe more, but I dont wanna be let down.
Then what a B series rod lengths, crank strokes, and pistons sizes. Any good links will even be sweet. lS/vtec 350bwhp(i hope)maybe more, but I dont wanna be let down.
09-18-2003, 07:31 PM
#2
Honda-Tech Member
Re: <Rod lengths, crank stroke, piston size, and sleeves? (ucantcatchmefoo)
09-19-2003, 11:51 PM
#3
Thread Starter
Join Date: Sep 2003
Location: Las Vegas, NV, USA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: <Rod lengths, crank stroke, piston size, and sleeves? (2.2Lcivic)
Thanks man, that was an very good web site, what about sleeves, do all b series blocks have sleeves, or do you just put them in when you bore them?
09-20-2003, 10:35 AM
#4
Join Date: Aug 2003
Location: Waterbury, Ct, USA
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: <Rod lengths, crank stroke, piston size, and sleeves? (ucantcatchmefoo)
all b-series blocks have cast iron sleeves, when you get your block resleeved by someone like golden eagle mfg. they use high-nodule ductile iron mfg'd with CNC equipment.
Thread
Thread Starter
Forum
Replies
Last Post
HotWheelz
Acura RSX DC5 & Honda Civic EP3
11
11-28-2003 11:52 AM
