Questions on S300
04-01-2007, 09:22 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2006
Location: Greenville, SC, UNITED STATES
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
Questions on S300
just got my s300. been reading through it alot and i have a few questions. i have the boost option along with it and using an Apexi solenoid. is the apexi a normally open or closed?? also where can i find the diagrams to find the pins for my OBD2 car? got a few more questions i will post up once i remember wat they are
04-02-2007, 04:37 AM
#2
Honda-Tech Member
Re: Questions on S300 (bigbadboy)
http://www.aempower.com
Go on their forum and they have complete pin-outs for each year car. Keep in mind you'll need to use an obd1 ecu in order to run the s300.
Go on their forum and they have complete pin-outs for each year car. Keep in mind you'll need to use an obd1 ecu in order to run the s300.
04-02-2007, 05:07 AM
#3
Honda-Tech Member
Re: Questions on S300 (bigbadboy)
The apex solenoid is a 3 way sol. It can be plumbed as normally open or normally closed. You want to plumb it normally closed with the common port going to the top of the gate.
04-02-2007, 06:21 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2006
Location: Greenville, SC, UNITED STATES
Posts: 1,362
Likes: 0
Received 0 Likes
on
0 Posts
cool thanks. i already have the s300 in an obd1 ecu. also is there any addition work to switch between high boost and low boost with the ac switch?
Thread
Thread Starter
Forum
Replies
Last Post
TehGhett0P1mp
Forced Induction
11
01-07-2009 09:34 PM
killa_lude
Honda Prelude
2
01-21-2004 08:35 AM
