soo im lookin to buy a precision turbo, i dont really know much about them i was going to get a garrett gt35r but was wondering if precision sold a turbo with pretty much the same specs as a gt35r...im trying to save a little bit of money and tryin to get away without having to run coolant lines to the turbo as well...

 

sc61 would be a pretty close to the 35r. Last time i googled it lol

 

what about the precision 6062?

 

what are you trying to do with the car, whats the setup

 

sc61. but for the price of a new one, might as well get the billet 6262.

 

^ What he said the new billet wheel technology from Precision is the way to go....no matter what your setup is Precision has a billet wheel turbo to meet your needs.

 

Gsr- wiseco 9:1 pistons, eagle rods, arp everything stock sleeves and some head work with itr cams, jg victor x mani
turbo kit- spoolin performance top mount, tial wastegate and tial q bov, back door intercooler and the ID 1000 injectors that's my setup so far I have a t3 turbonetics turbo on it right now on 10psi lookin for more power, lookin to hit around 400-550hp
here's a pic

 

pickup a billet 6262 journal bearing fo 899 and you can make some really nice power on pump gas and max out with stock sleeves around 500whp

 

Im actually gonna run c16 once I get my new snail ya I'm eyein that precision billet 6262 with the anti surge cover and .82ar what do you think?

 

race gas is fine but stock sleeves become unreliable when you start pushing over 500whp. you can make more but the life of the sleeves isnt much

 

I'm not lookin to hit over 500hp unless I decide to build a sleeved bottom end

 

then you should be ready to rock n roll with the 6262 on pump

 

i make 400 hp at 20 psi on a stock sleeve b16 with a 6262 .82 hot side. a bit laggy on the b16, but full boost around 6500. this is on 110 race gas. this turbo will be much better once i get a built sleeved b18 bottom end. can't beat the price considering what it does.

 

Damn thats worse lag than it is on a singlecam....... 6262 FTW

 

You should look at the precision 5757 it will meet your horsepower needs and not be as laggy as 6262

 

Will do

 

what about the precision billet 5857?

 

I think thats what he meant to say, and the anti surge covers are back ordered for 6262 IIRC, only ported schroud. ish/maybe