Precision 6765 H Compressor Diameter
#1
Precision 6765 H Compressor Diameter
Hi im going to buy a 6765 , well 6766 now with the HP Housing but i cant seem to find a meseasurement i need no where, mayb someone willing to make the measurement of Theirs for me thanks.
-->( O )<--
Its the Diameter in inches of the Compressor Housing when the 3'' Air outlet is probably facing downwards or like where it says 8.26 here for this Turbonetics http://www.turboneticsinc.com/sites/...RIES_TURBO.pdf
-->( O )<--
Its the Diameter in inches of the Compressor Housing when the 3'' Air outlet is probably facing downwards or like where it says 8.26 here for this Turbonetics http://www.turboneticsinc.com/sites/...RIES_TURBO.pdf
#4
Re: Precision 6765 H Compressor Diameter
2010 .pdf of the Precision catalog had some housing dimensional drawings I thought. I do not have a copy of it here at work to look at but you might see if you can find a copy online to check.
#6
Re: Precision 6765 H Compressor Diameter
lol gotta buy my manifold first , precision only has drawings of the sp cover wich is around 7.6'' Total Diameter , this H cover looks around 8.6'' by sight , no one has a vernier caliper and a precision H cover ? lol
#7
Moderator
iTrader: (14)
Re: Precision 6765 H Compressor Diameter
Precision H covers are GIGANTIC to use and 90% of the people on these forums don't use anything remotely close to that size.
The only other companies that truly use anything close to those sizes are Borg-Warner, and Turbonetics. Contacting Turbonetics would be good because they currently have drawings and specs for H covers that are available now.
The only other companies that truly use anything close to those sizes are Borg-Warner, and Turbonetics. Contacting Turbonetics would be good because they currently have drawings and specs for H covers that are available now.
Thread
Thread Starter
Forum
Replies
Last Post