nice lonnie. what endtanks are those?

 

Apex i and custom RPMNYC

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Charlie Moua &raquo;</TD></TR><TR><TD CLASS="quote">Well I don't know where Iggy(quickB18b) is but I'll post for him.
This is the same small FMIC I have. They say it's suppose to support upto 350hp.
Would it be ok if I was into the 300whp range a few time?
</TD></TR></TABLE>

I am right here Damn thats alot of pics of my shiet

Charlie since you have the same intercooler, did you noticed that because the inlet/outlets on the small FMIC are more central in the endtanks then lower. Did it make your intercooler pipes angled? If you look at the my pic above you can see the piping angles down after coming into and out of the inlets It bugs me so much, Plus I wish it filled up more of the bumper

Anyone else running the small one have this problem?

Art it's nice to see pics of your car, I havent seen in it ages

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by espanol &raquo;</TD></TR><TR><TD CLASS="quote">

we can make them for either 92-95 civic or 94-01 integra.$80 and only for the precision 31.5" x 10.3" x 3.5" intercooler </TD></TR></TABLE>

start making 96-00 ek i'll buy 2 sets!

 

yup... if you could do one for an EK i'd pick up a set.

 

PLEASE

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quikB18B &raquo;</TD></TR><TR><TD CLASS="quote">
It bugs me so much, Plus I wish it filled up more of the bumper
</TD></TR></TABLE>

Its nice, but its a lot of hassel....my IC is pretty big (width wise) and fits nicely with only 3 or 5 inches on each side to the end of the openning, but its just a paint to work with, and the ****** is heavy.

 

Whats size bolts do you use for the precision IC's?

 

5/16"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1SlowSi &raquo;</TD></TR><TR><TD CLASS="quote">I dont know the sized that precision carries but i just want one that will fit a 99Civic Si with out problems or extreme mods. and will be good for 500-600hp. which one</TD></TR></TABLE>


im putting it on my 99 si it fits perfect. just need to get some
nice brackets like arturbo

 

anyone else have pics, i will be getting mine next week and need some suggestions on how to mount it on my 97 teg

thanks

 

I just installed mine on my 99 Si this weekend (1025, 31.5x8x3.5). I had to cut a notch out of the bumper support to make it fit, however. If I went w/ custom IC piping, I would have been able to shove it up between the bumper support and the radiator & condensor. However, I went w/ pre-fabbed piping that forced me to place the IC right where the BS is. Oh well, it looks great now!

-Mark

 

anyone else ?

 

Anybody have one with an EF?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridHatch88 &raquo;</TD></TR><TR><TD CLASS="quote">Anybody have one with an EF? </TD></TR></TABLE>


hahha that's what i really wanted to find. I think my EF hb si with the WW kit and precision 26 x 6.3 x 3.5.... but havent installed it yet..

https://honda-tech.com/zerothread?id=668990

 

Not on the car yet but here it is:

 

that one is
31.5" x 10.3" x 3.5"

but it looks like much smaller..... hum

 

MwGSR is a pimp with his precision IC, red valve cover.. AND burberry blankets

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IntegracinGSR &raquo;</TD></TR><TR><TD CLASS="quote">MwGSR is a pimp with his precision IC, red valve cover.. AND burberry blankets</TD></TR></TABLE>

hehehe you know it.

 

do these have 3 inch inlet/ outlet ? or can you at least get that option?

 

Here's mine:






Modified by TwoK4drSi at 4:54 AM 3/26/2004

 

^^^ just the pics i was looking for...fmic w/ oem fogs. it never hit me that all u have to do is turn the cooler upside down. do you have anymore pics of the piping...like from the cooler to throttle body?

 

ummmm.. not right now but you can see it in the last pic kinda. just image the piping connecting. if you can't think of it then next time i take off my bumper, i'll post more pics. the only sacrifice i made was the water bottle for the nozzles but who needs that anyways. Water bottle or fogs........which would you choose?

 

Thats the Subzero (Big Chill) Precision Intercooler thats been BBE from Swain Tech.

Just got in done.