P/W clearences in b16a2 and cp
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: POLAND, POLAND
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
P/W clearences in b16a2 and cp
i have stock sleeves and cp pistons, i want about 400whp, stock sleeves and cp pistons have 0,0049 clerarnces - is it not too big ?, should i sell this piston and buy OS ones?
#2
Honda-Tech Member
Re: P/W clearences in b16a2 and cp (bzyq2001)
from what ive seen and used over the years that piston to wall is a little loose. you should be aiming around ~3 thou
Thread
Thread Starter
Forum
Replies
Last Post
BlueSi2k
Forced Induction
10
03-07-2003 11:18 AM