ow to tune with hondata s300
#1
Thread Starter
Join Date: Sep 2007
Location: cocoa, fl, brevard
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
How to tune with hondata s300
I will be using hondata s300. I want to try and tune the car myself. Ive downloaded the Smanager and been trying to understand what the values in the tables are. Can anyone help me better understand the reading of the tables and the system in general. Feedback would be greatly appreciated. Thanks
I have a d16z6(stock block) with turbonetics t3/t4 turbo, tubonetics Evolution wastegate, turbonets Raptor blow off valve, eagle rods, vitara pistons, dsm 550 injectors. Im running 5lbs now with no tune. I want to run about 15 psi.
I have a d16z6(stock block) with turbonetics t3/t4 turbo, tubonetics Evolution wastegate, turbonets Raptor blow off valve, eagle rods, vitara pistons, dsm 550 injectors. Im running 5lbs now with no tune. I want to run about 15 psi.
#3
Member
Join Date: Aug 2004
Location: Oklahoma City, OK, usa
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
Re: (bigbadboy)
u need to understand the fundamentals of tuning first, what ur overall goal is and how to get there without putting ur motor at risk for failure.
Good place, if its still up, is http://www.pgmfi.org or go grab a couple of books and read up. But even so, reading will not replace experience, but it will give u an idea of what the hell ur doing.
Good place, if its still up, is http://www.pgmfi.org or go grab a couple of books and read up. But even so, reading will not replace experience, but it will give u an idea of what the hell ur doing.
Thread
Thread Starter
Forum
Replies
Last Post
H23ludedude
Forced Induction
10
05-05-2002 09:03 PM