After a couple of weeks of research on fittings and hoses, I finally got all the information I needed from a place called "American Street Rod" in CA. To complete the replacement of the standard Drag oil return line, I ordered the following items:

-10An male steel weld fitting ($5.83)
-10An 45-deg tube swivel seal ($27.24)
-10An Perform-o-flex SS hose ($9.82)
1/2 NPT to -10An 90-deg swivel seal ($35.00)

Total: $77.89 + shipping

I suggested to a representative at American Street Rod that this should be marketed as a kit to save people the headache that I went through.... although I realize now that there really was nothing to it. If anyone needs an oil return line kit for their Drag turbo, visit their informative site at www.amstreetrod.com or email Tim@American Street Rod, at asr1app@ix.netcom.com

Installation instructions can be found at this thread https://honda-tech.com/zerothread?id=67146

Hope this helped.


[Modified by b18c1-ek, 3:04 PM 10/21/2001]

 

Got the same stuff at a local dealer for Earls products.