oil in my ic piping, wtf is goin on?
#1
Member
Thread Starter
Join Date: Jun 2005
Location: Bay Area, ca
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
oil in my ic piping, wtf is goin on?
sup all, pretty new to the turbo world... finally got my motor to run decent with the turbo in. i have a b16a running all the basics with a t3/to4e turbo... last night when i was test driving, when i got back to check the pipes, oil was coming out from the intercooler? not a whole lot but enough to make me wonder what the hell is going on? my friend was telling me i might have blown an oil seal in the turbo... also i think im running extra rich right now. heres the setup...
b16a
t3/to4e turbo
255 fuel pump
fmu
stock injectors for now
p28 w/ p30 map chipped for chrome
obd1 conversion
any advice folks?
b16a
t3/to4e turbo
255 fuel pump
fmu
stock injectors for now
p28 w/ p30 map chipped for chrome
obd1 conversion
any advice folks?
#2
B A N N E D
Join Date: Jul 2004
Location: east coast, nc, us
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
Re: oil in my ic piping, wtf is goin on? (bnut510)
too much oil pressure going to the turbo, and/or bad turbo seals. what weight oil are you running and what size feed line?
#3
Honda-Tech Member
Join Date: Nov 2003
Location: T dot, O, Hemp Nation
Posts: 1,625
Likes: 0
Received 2 Likes
on
2 Posts
Re: oil in my ic piping, wtf is goin on? (bnut510)
Oil in your IC piping is a tell tale sign of your turbo oil seal being faulty. How much oil is there? Is your turbo brand new?
#5
Member
Thread Starter
Join Date: Jun 2005
Location: Bay Area, ca
Posts: 1,190
Likes: 0
Received 0 Likes
on
0 Posts
Re: oil in my ic piping, wtf is goin on? (Chillinit)
Oil in your IC piping is a tell tale sign of your turbo oil seal being faulty. How much oil is there? Is your turbo brand new?
- yeh im hoping its not a blown oil seal? how much is it to fix this problem? theres not much oil tho... i drove it for about 25 minutes from a friends house back home and it only leaked about 1 teaspoon amount of oil? not tooo much.. so last night... i opened up the piping to let any excess oil out and put it back on this morning... it seems to run ok tho but i havent hit vtec... i have a feeling if i rip it when vtec hits... something might go wrong... btw it hasnt been tuned... could that be a major problem? i will be tuning the car out this weekend, along with #s to post and any additional info.
- yeh im hoping its not a blown oil seal? how much is it to fix this problem? theres not much oil tho... i drove it for about 25 minutes from a friends house back home and it only leaked about 1 teaspoon amount of oil? not tooo much.. so last night... i opened up the piping to let any excess oil out and put it back on this morning... it seems to run ok tho but i havent hit vtec... i have a feeling if i rip it when vtec hits... something might go wrong... btw it hasnt been tuned... could that be a major problem? i will be tuning the car out this weekend, along with #s to post and any additional info.
Thread
Thread Starter
Forum
Replies
Last Post
sporkcrx
Forced Induction
7
11-03-2002 11:33 AM