New to Supercharging
#1
Thread Starter
Join Date: Mar 2006
Location: Poconos, PA, usa
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
New to Supercharging
Hey guys.. Im currently running a 98 EX SOHC d16y8 with a Jackson Racing supercharger, its at 6psi, JR fmu, I've added: MSD ignition, MSD coil, MSD distributor, MSD wires, MSD 550cc injectors, Walbro 255 fuel pump, AEM fuel rail, KOYO radiator, 160* thermostat,. Now from you guys opinion what else should be added or upgraded?
Also, what about tunning, i mean i've heard that having FMU's are crappy.. whats the least expensive alternative to replace this but not cheap performance wise?
**Like i said im new to this and im having a hard time finding info on superchagers let alone info on a sohc.
So any info.. and advices, any sites forums etc would be greatly appreiciated
thanks guys!!
Also, what about tunning, i mean i've heard that having FMU's are crappy.. whats the least expensive alternative to replace this but not cheap performance wise?
**Like i said im new to this and im having a hard time finding info on superchagers let alone info on a sohc.
So any info.. and advices, any sites forums etc would be greatly appreiciated
thanks guys!!
#2
Honda-Tech Member
Re: New to Supercharging (PhantomEJ8)
MSD 550 injectors? Are you running these with a stock ECU?
The best bet for you is a chipped ECU, it's cheap and capable of providing a good safe tune.
Here's the unofficial JRSC thread, it's probably got every SC answer you could want in it somewhere:
https://honda-tech.com/zerothread?id=1214810&page=1
The best bet for you is a chipped ECU, it's cheap and capable of providing a good safe tune.
Here's the unofficial JRSC thread, it's probably got every SC answer you could want in it somewhere:
https://honda-tech.com/zerothread?id=1214810&page=1
Thread
Thread Starter
Forum
Replies
Last Post
R.A.T.
Forced Induction
5
02-08-2010 12:15 AM