New Setup, Stock B16 57 Trim @ 14psi
#1
B A N N E D
Thread Starter
Join Date: Jul 2007
Location: Fargo, ND, USA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
New Setup, Stock B16 57 Trim @ 14psi
Hey I have never introduced my car before but I just finished my new set up and got it all tuned and what not.
2000 Civic Si.
Tein Stechs
16 in Konig Heliums w/ Hankook Rs2s
Magna Flow Catback, soon to be SLS 3in
Engine:
B16 Stock
Precision 780 cc
AEM EMS
ACT 6 Puck
Turbo Set up:
SLS Prototype T3 Manifold
SLS 3" Down Pipe
Precision .57 Trim Turbo
SLS 24x8x3.5 Intercooler and Piping.
Tial Bov
Tial 44mm gate
SlS Manual Boost controller
On the day of the Dyno the Temp was 100 degrees and humid. It made 338 on pump and then switched to E85 and it made 378hp and 258 ft/lbs @14 lbs on a very rich tune. I was happy with the numbers and decided not to really push it further being so hot outside.
2000 Civic Si.
Tein Stechs
16 in Konig Heliums w/ Hankook Rs2s
Magna Flow Catback, soon to be SLS 3in
Engine:
B16 Stock
Precision 780 cc
AEM EMS
ACT 6 Puck
Turbo Set up:
SLS Prototype T3 Manifold
SLS 3" Down Pipe
Precision .57 Trim Turbo
SLS 24x8x3.5 Intercooler and Piping.
Tial Bov
Tial 44mm gate
SlS Manual Boost controller
On the day of the Dyno the Temp was 100 degrees and humid. It made 338 on pump and then switched to E85 and it made 378hp and 258 ft/lbs @14 lbs on a very rich tune. I was happy with the numbers and decided not to really push it further being so hot outside.
#3
Honda-Tech Member
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: (ARAXIS)
nice, im doing a similar set up but with a type R head and stock sleeve b16a block with forged pistons and rods, good to know where ill be at.
#6
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2005
Location: NoVa
Posts: 4,849
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RC000E)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by herecomesboost »</TD></TR><TR><TD CLASS="quote">Yeah man, really nice manifold. Good numbers too </TD></TR></TABLE> Just noticed that you are still on stock internals. VERY good numbers
Trending Topics
#12
Man U FTW
nice numbers again Mike....i talked to Shane today and it sounds like i could easily do E85 and Neptune next year....once i get some larger injectors and a 3bar
#15
Honda-Tech Member
Join Date: Feb 2006
Location: Pittsburgh, PA GO PENS!!!
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Re: (patrick4588)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by patrick4588 »</TD></TR><TR><TD CLASS="quote">what is the benefit to running e85? i have been hearing a lot about it lately?</TD></TR></TABLE>
someone correct me if im wrong but doesn't it have an octane rating of close to 100? And it's cheaper then race gas.
someone correct me if im wrong but doesn't it have an octane rating of close to 100? And it's cheaper then race gas.
#19
Junior Member
Join Date: Dec 2005
Location: Kansas City, USA
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Re: (wrayzor)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wrayzor »</TD></TR><TR><TD CLASS="quote">Sorry for the threadjack but the only place I have seen E85 sold is sheetz up here in Pittsburgh, where else sells it? </TD></TR></TABLE>
Here yah go
http://www.e85refueling.com/lo...cdc6c
Here yah go
http://www.e85refueling.com/lo...cdc6c
Thread
Thread Starter
Forum
Replies
Last Post
red_hatchback
Forced Induction
9
05-30-2007 10:56 AM