Need some advice about piping/SMIC issue
10-03-2002, 05:22 PM
#1
Honda-Tech Member
Thread Starter
Need some advice about piping/SMIC issue
Hey, I have a 90 Civic with a ZC with a greddy turbo, Im trying to use a 90 Eclipse side mount intercooler on it. The intercooler fits fine but Im abit concerned about my piping configuration. For the bottom piping Im going to have to get a sharp almost S turn welded. Im wondering if this will hurt my performance because the air flow is not as smooth. Also the piping on the IC is a tiny bit smaller then the Greddy piping, any suggestions how I can clamp them together? Thanks!
10-03-2002, 05:45 PM
#2
Member
Join Date: Apr 2002
Location: Los Angeles, CA
Posts: 3,223
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need some advice about piping/SMIC issue (CWBETB)
There is a HB online somewhere with a GReddy powered SOHC turbo kit using the stock eclipse SMIC. It looks nice and I'm guessing you're just gonna have to get custom piping done to work your way around things.
Thread
Thread Starter
Forum
Replies
Last Post
boostincoupe
Forced Induction
1
07-05-2003 11:57 AM
DigitalFusion
Forced Induction
8
06-20-2002 03:35 PM
