need help!
Thread Starter
Honda-Tech Member
Joined: Jul 2007
Posts: 178
Likes: 0
need help!
wussup guys im starting a build and i need help wit a turbo setup. this is my motor...
block:
b18c1 sleeved and bored to 83mm with ls crank, eagle rods and 9:5:1 Cp pistons
head:
gsr head with skunk2 springs & retainers, ctr cams, victor x manifold, 70mm t/b, (might get supertec valves)
fuel/mangement:
255 walbro, 1000 rc injectors, aeromotive regulator most likely tuning on crome pro unless i can get my hands on an aem ems
turbo:
i was thinking either a sc6152sp or a sc6176sp (need help), top mount, 3" alumium intercooler pipes with a 24x12x3 intercooler, tial wastegate and tial bov
im trying to get into mid 600hp with this setup let me know what u guys think ALL COMMENTS ARE WELCOME
block:
b18c1 sleeved and bored to 83mm with ls crank, eagle rods and 9:5:1 Cp pistons
head:
gsr head with skunk2 springs & retainers, ctr cams, victor x manifold, 70mm t/b, (might get supertec valves)
fuel/mangement:
255 walbro, 1000 rc injectors, aeromotive regulator most likely tuning on crome pro unless i can get my hands on an aem ems
turbo:
i was thinking either a sc6152sp or a sc6176sp (need help), top mount, 3" alumium intercooler pipes with a 24x12x3 intercooler, tial wastegate and tial bov
im trying to get into mid 600hp with this setup let me know what u guys think ALL COMMENTS ARE WELCOME
Thread
Thread Starter
Forum
Replies
Last Post
