My experiences with Web Racing Cam
#26
Honda-Tech Member
Join Date: Dec 2001
Location: Tallahassee, Florida, USA
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Re: My experiences with Web Racing Cam (boosted3g)
Of course, I've never heard that in Honda circles, but it's semi-common in DSM land. I've heard it more than a few times, but alot of people run those cams because there are basically 2 cam choices for the 4G63. I'd still get it anyway
#28
Honda-Tech Member
Re: My experiences with Web Racing Cam (NOCARLOSER)
If you are having trouble with reground cams going flat, look at your core, not the regrinder. The heat treating on stock Honda cams goes .090 deep into the metal. Regrinding the cam takes a lot less off than that. Reground Honda's work better than a billet cam that was not hardened properly. I would blame the DSM cores, not the company doing the regrind.
#32
Re: My experiences with Web Racing Cam (Blaze45)
I see only like 4 names being thrown around here.....what Crane Cams? I have heard they arew good and that they don't do regrinds but are new cams....
Thread
Thread Starter
Forum
Replies
Last Post