MotorMatrix.com

Well, we dynoed our street car again since we never got a dyno paper from months ago when we built it. This was done with Hondata. I'm not sure of the limits of the Hondata but it doesnt seem like 500-550hp will be a problem for it. I am going to go to a bigger turbo to see if the hondata can manage 600+ hp. ill post up the new dyno sheet sometime next week.




[Modified by MotorMatrix.com, 4:17 PM 1/6/2003]

bgod

very impressive for a car that's still somewhat street legal or street driven.

avividmemory

Hey Albert, what was the torque curve on that dyno?

The Destroyer

Hey whats the shop and where is it in ft lauderdale.?

MotorMatrix.com

Actually, we didnt get torque reading because the dyno wasnt working with the rpm pickup. some technical difficulty. by the way this Mike, My partner is albert but he doesnt come on honda-tech.

MotorMatrix.com

the shop is MotorMatrix and we are located in margate. on 441 north of atlantic and south of copans accross fromt he uhaul.

DRAGLS

Hey mike what size turbo are u running now and what size injectors are u using also what was the final injector duty cycle for those pulls?

MotorMatrix.com

still running the same 62-1 w/ 980 injectors. I'm unsure of the duty cycle as I didnt have the laptop hooked up for the Hondata. I just made the pulls!!

SIXTYdashONE

nice.....

bambooluv

mang thats insane for a daily car , and who would of thought hondata can push that much.....

Smashback

Haha ... street driven, not legal

paulzy

iTrader: (1)

Very Nice

Canuk_SiR

very nice, doesen't even look like much lag either

MotorMatrix.com

we will find out by the weekend if the hondata will manage past 600whp. Anyone know of someone who has made a verified 600+whp??

Bnjmn

It shouldn't be a problem- it is only controlling fuel and spark- Hondata shouldn't know the difference between 92hp and 692hp.

Ben

1.8T_EG

how far/close are you to pensacola?... i am looking for a shop to get a hondata and tuning done...

MotorMatrix.com

we are about 4-5 hours I think. punch in our address on maps.com or mapquest or something to get a really good idea. 1799 n. state rd 7 margate,fl 33063

MotorMatrix.com

probably true but i think it is lacking some other functions that make it a bit safer to run 600+whp. like wideband 02 and such.

bottlefedb18c1

nice numbers on that

if you dont mind can you discuss your set-up?

Blown90hatcH

To my knowledge, you guys are the first past the 525 mark. Rocky held the highest that I knew of with the hondata. He did 625 or so when he switched to Haltech. Great job on the Hondata though....as it goes to show that my speedpro may just be over kill. Hondata gets the job done.

I Like Boost

Is the shop on the east or west side of 441, good run btw.

RyanAutry

If you can get me your Tire diameter and gear ratio's I can make a Dyno graph with HP and TQ curves...

If you want.

Jason kiDD

Love the numbers... Is the street car h22 powered as well??

MotorMatrix.com

we can run 14psi on pump. the only thing is that I have a 19psi wastegate spring so I'm on race gas always.

MotorMatrix.com

tire diameter should be about 25 inches and I have a type r tranny.

I am running a b series motor. only our race car is an h series. I didnt really want all the torque for the street.