My Microtech finally arrived. I'm still looking at the harness but everything looks good so far. Thought I would post up pictures as well. Does anyone have any suggestions, tips or anything when installing/using Microtech? This is my first time with Microtech. I will make a tech oriented post after the install and after Blown90Hatch/Jason and I have a little time with it.

 

nice system, good luck with it.. keep us updated

 

What makes these standalone differ from AEM or Hondata?

 

Talk to the guys at Central Florida Turbo... they have them installed in just about everything... LoL.

But that'd be where i'd go if i had any questions about it. Its also where i'd go to have it tuned, since they know it so well

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ComposiMo &raquo;</TD></TR><TR><TD CLASS="quote">Talk to the guys at Central Florida Turbo... they have them installed in just about everything... LoL.

But that'd be where i'd go if i had any questions about it. Its also where i'd go to have it tuned, since they know it so well </TD></TR></TABLE>

I dont know anyone at Central Florida Turbo and I dont plan on them tuning so I wont bother them Blown90Hatch and I are going todo everything. Blown90Hatch is more than qualified to tune and I trust him more than anyone.

 

its easier to tune than halteck

 

^^ haltech

 

im not familiar with the microtech , what sorts of features does it have? price?

 

http://host49.ipowerweb.com/~t...o.wmv
check out thr viedo they know how to tune the lt8

 

My friend sent me a link awhile back to Microtech. That EMS = $$$$.

0x64 you better be doing a sick build...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">im not familiar with the microtech , what sorts of features does it have? price?</TD></TR></TABLE>

* 32 bit Motorola processor
* Tunable in MAP or TPS or a combination of both
* 16x16 load sites (Talked to Tim at Microtech. They are going to release an update for 32x32 load sites next year)
* Air temp correction
* Hard cut RPM limiter
* Soft cut RPM limiter
* Internal map sensor (25PSI)
* Aux inputs/outputs
* Datalogging

I want to get some hands on experience with this before I post any comments on it. I paid $750.00 for the unit and harness.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vtaaak y0 &raquo;</TD></TR><TR><TD CLASS="quote">My friend sent me a link awhile back to Microtech. That EMS = $$$$.

0x64 you better be doing a sick build... </TD></TR></TABLE>

We will see what I can do. I dont want to disappoint

 

sounds like a good deal, can't wait to see the results

 

did you get teh dash display? its pretty pimp. im considering it since i need some in car entertainment for the ladies...

 

very nice! Looking forward to your write-up. I haven't seen to much info on Microtech.

I know the guys at CFT have someone using it.

 

I'm very intrested how good I'll be compared to Hondata...Keep us posted...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 &raquo;</TD></TR><TR><TD CLASS="quote">

I dont know anyone at Central Florida Turbo and I dont plan on them tuning so I wont bother them Blown90Hatch and I are going todo everything. Blown90Hatch is more than qualified to tune and I trust him more than anyone.</TD></TR></TABLE>Hey, its all good... no need to respond like that... you asked who knew about it and who had any tips or tricks with it, and i am just giving you the info on the people around here who know the most about it and can help you with it. One of the shops cars is making over 600 to the wheels, daily driven one Microtech, and the other is at like 540 something daily driven... and theyve installed them in everything from Civics to WRX's, to old school rotaries... If you are serious about wanting to know tips or tricks, then contact them 321-235-9959... even if they aren't doing the tuning, i'm sure they'd be willing to help you out.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ComposiMo &raquo;</TD></TR><TR><TD CLASS="quote">Hey, its all good... no need to respond like that... you asked who knew about it and who had any tips or tricks with it, and i am just giving you the info on the people around here who know the most about it and can help you with it.</TD></TR></TABLE>

Damnit. I knew my post was going to come off negatively to some people. That's why I put the smile at the end. I couldnt think how to word it right. Didnt intend for my post to come off negatively or with ANY hostility toward you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 &raquo;</TD></TR><TR><TD CLASS="quote">

Damnit. I knew my post was going to come off negatively to some people. That's why I put the smile at the end. I couldnt think how to word it right. Didnt intend for my post to come off negatively or with ANY hostility toward you </TD></TR></TABLE>

Shut up.

What turbo are you goign to be using...any hints of what might be going on?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Vtaaak y0 &raquo;</TD></TR><TR><TD CLASS="quote">

Shut up.

What turbo are you goign to be using...any hints of what might be going on?</TD></TR></TABLE>

I have a Precision GT30r on the way. I cant hide any of my build as bits and pieces are on Honda Tech It's going on a fully built 1999 B18b in a 1992 Honda Civic CX. The only things that set my build apart from other's is the Microtech, custom camshafts and a little auxillory device/injection I have not posted about yet.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbosi03 &raquo;</TD></TR><TR><TD CLASS="quote">sounds like a good deal, can't wait to see the results </TD></TR></TABLE>

You will be one of the first to know.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mpir3 &raquo;</TD></TR><TR><TD CLASS="quote">did you get teh dash display? its pretty pimp. im considering it since i need some in car entertainment for the ladies...</TD></TR></TABLE>

I'm looking into it now. I will probably get it due to datalogging becomes a pain in the ...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboChrgd_Civic &raquo;</TD></TR><TR><TD CLASS="quote">very nice! Looking forward to your write-up. I haven't seen to much info on Microtech.

I know the guys at CFT have someone using it.</TD></TR></TABLE>

Thanks. I'm going to get some time with it so I can make a full post about it.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CivicEJ1 &raquo;</TD></TR><TR><TD CLASS="quote">I'm very intrested how good I'll be compared to Hondata...Keep us posted... </TD></TR></TABLE>

Hondata is great but the s100 and s200 development are lacking IMHO. Uberdata seems to be pushing forward. One thing that caught my eye at first was the IAT compensation in Microtech. The customer service has been nothing but great as well. Let's hope that doesnt change.

 

For 750 thats tought to beat.

 

we have been using and selling the units for quite some time, intalling them from civics to hayabusas. if you need any help or info let me know. i have a unit on my personal car and yes its pushing 600+ whp

 

Nice ems you got there