How much power can a Precision gt35sc61 T4 with a .70ar ported S housing and .68ar on the exhaust support..? Thanks guys



Modified by Dublocivic at 1:25 PM 10/12/2005

 

zz

 

the AMS EVO did about 660 whp ON 38 PSI with that turbo setup.

 

Thanks. Anyone else..? Just curious of flow and hp capabilities.
Thanks

 

I believe Precision rates them at around 680hp.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civicross &raquo;</TD></TR><TR><TD CLASS="quote">I believe Precision rates them at around 680hp.</TD></TR></TABLE>

that is CRANK HP.. Use 20% reduction for driveline loss

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TheShodan &raquo;</TD></TR><TR><TD CLASS="quote">

that is CRANK HP.. Use 20% reduction for driveline loss</TD></TR></TABLE>

20%, are you insane? We had a friends mustang motor on an engine dyno and it didn't even lose 20% to a chassis dyno, and that's in a more power hungry RWD setup. It's already been proven to do atleast 650 WHP, so that's 100 WHP more than your supposed 20% loss figure. Kinda throws that, as well as PTE's 680 HP rating out the window.

 

From what I've noticed, the HP ratings tend to be on the conservative side.

 

605 whp on a gt3561 with gt40 wheel thats on a t3 flange at 26psi on abuilt h22 with modertate tunnong this is a very nice turbo for a street / track turbo stil has more in it also

 

good info thanks..