LS/VTEC BUILDUP
01-24-2002, 02:17 PM
#1
Member
Thread Starter
Join Date: Sep 2001
Location: Texas
Posts: 1,419
Likes: 0
Received 0 Likes
on
0 Posts
LS/VTEC BUILDUP
Im on a mission and need some "EXPERIENCED" opinions.
So Far:
B16A head- ported & polished
port matched intake and exhaust
ported intake manifold to 65mm
ferrea SS exhaust valves (oversized)
ITR intake valves (porcelin coated)
3 angle valve job
DPR Valve springs
CTR intake cam & ITR Exhaust cam
Right now Im gearing up to do the bottom end:
This in mind- Golden Eagle 84mm sleeves
endyn rods and pistons (?? compression-any suggestions)
blue print, balance, and bearings.
Looking for suggestions regarding compression, computer management, and Turbo. Any insight or suggestions from experienced builders would be much appreciated. Also, if anyone knows any tuners in the SOUTH (Mississippi, Florida) let me know.
Leave the trash behind, don't want to hear it....
So Far:
B16A head- ported & polished
port matched intake and exhaust
ported intake manifold to 65mm
ferrea SS exhaust valves (oversized)
ITR intake valves (porcelin coated)
3 angle valve job
DPR Valve springs
CTR intake cam & ITR Exhaust cam
Right now Im gearing up to do the bottom end:
This in mind- Golden Eagle 84mm sleeves
endyn rods and pistons (?? compression-any suggestions)
blue print, balance, and bearings.
Looking for suggestions regarding compression, computer management, and Turbo. Any insight or suggestions from experienced builders would be much appreciated. Also, if anyone knows any tuners in the SOUTH (Mississippi, Florida) let me know.
Leave the trash behind, don't want to hear it....
Thread
Thread Starter
Forum
Replies
Last Post
StrokeDC2
All Motor / Naturally Aspirated
9
10-17-2015 12:27 PM
DC4cedInducted
Tech / Misc
4
02-06-2006 06:46 PM