I have a d15b7 with a z6 head.
i was looking into building the block
but there is not a whole lot of room
for improvement, i was looking into the ls
rods but i was not sure if they can be machined to
fit the d15's?

 

Nooo step away from the vehicle before you harm yourself or severely screw something up.

 

^^ what he sayd. LS and D15 Have Waay different strokes.

 

How on earth is an LS rod an improvement?

 

because there 300whp capable and im looking for around 270 on boost.. and there cheap. but i guess my best bet is a z6 block eagles/vitaras so thats that, thanks guys

 

or some srp pistons.

 

they only work in the d16. but yea vitaras and eagles are probably your best bet

 

Ya it kinda sucks there is no support for d15 it would be nice to have something diffrent.

 

Have to install bushings in the small end to fit the d15 piston rings. Crower used to sell them, may give them a call to see if they still ofer them. I would just save a little and get Eagle rods or Tuner Toyz rods and call it a day.

 

ya true, but if i were using vitaras they would fit the ls connecting rods as far as i know? Correct me if im wrong.