Can someone plz post a picture of their wideband sensor bung in their downpipe, or guide me to a relevant thread?

i have a 99 Civic Si b16a2, with a Peakboost ramhorn manifold, 3inch dwnpipe. Lc-1 Innovate WB.

Thanks
Adam

 

AEM says 18" - 36" away from the wheel. mine is in the stock location. i run open loop so dont use the stock one.

 

Mine is right next to the stock O2 and is mounted in the 11 o'clock position.

 

Mine is right next to the stock location, right in before the cat.

 

thanks very much!

 

As long as its infront of your cat, then your laughin

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dunc &raquo;</TD></TR><TR><TD CLASS="quote">Mine is right next to the stock O2 and is mounted in the 11 o'clock position.</TD></TR></TABLE>

x2

 

does it matter what angle the sensors at?

 

Not really, just as long as its not pointing down so it doesn't get ripped off by road contact.

 

Thanks.

 

most manufacturers recommend placing the sensor vertically in between the 10-2 O'clock positions.

it prevents cracking of the sensors ceramic element and contamination from water/ condensation.