<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92lSilude &raquo;</TD></TR><TR><TD CLASS="quote">block guard... lol... its a closed deck block dumbass... maye you all are right... and for the dude who says to quit tellin myself i wont boost over 12... your not getting it... this is my everyday driver it has to be reliable... therefor im not going to be running insane boost and risk not having a car... at least civictypenos wasnt an *** about it... hey MachAF... you wanna tell me where i can get an H23 GE or Benson block</TD></TR></TABLE>

seriously,everyone is different and some have more will power than the rest.i told myseld that 10 psi was my max,first trip to the track after it was tuned and i was turning it up to 15.not saying you will,but for daily driving i keep it at 10 and at the track i bump it up.it feels great,now im switching turbo for a bigger one a nd getting a built block.speed is addictive!!

 

haha... never go over 12lbs is a bold statement... my tiny single cam was 10lbs daily driven... you're going to want more than just 7-8 lbs...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92lSilude &raquo;</TD></TR><TR><TD CLASS="quote">block guard... lol... its a closed deck block dumbass... </TD></TR></TABLE>

Slow your roll and listen u turd!

 

ok...fine... anyone want to give me some suggestions on real sleeves then? well say 800 or less if thats possible including install labor etc thanx

 

AEBS or GE .

 

AEBS is like $1400 not 800

 

Serisously dude, Good work aint cheap and cheap work aint good.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo &raquo;</TD></TR><TR><TD CLASS="quote">Serisously dude, Good work aint cheap and cheap work aint good.</TD></TR></TABLE>

Good Advise

 

well the dude who posted the pics said he got those done for 900... they dont exactly look bad. I know cheap = lack of quality most times. But are you telin me i cant get good sleeves for 1000 or less?

 

If AEBS is too expensive, get Golden Eagles and boost your "maximum 12psi" with $800 sleeves. Then when you turn the boost up to 16 because 12 feels "slow", you blow em out and wish you would've gone AEBS in the first place .

 

y pay 600 for a 12psi sleeve when u pay 900 for 30psi sleeve... makes no sence to me.. but if u wanna 1/2 *** it go ahead... darton makes oem replacements i think

 

ok, i believe i already said fine i should go with the boosted sleeves instead, 900 for 30psi sleeves, yeah show me where i can do that is what im askin now you dumb ****

 

how about i just get aJG engine dynamic long block thats already sleeves with pistons and rods and everything else

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92lSilude &raquo;</TD></TR><TR><TD CLASS="quote">how about i just get aJG engine dynamic long block thats already sleeves with pistons and rods and everything else</TD></TR></TABLE>

Great idea. Now how bout you quit your little temper tantrum, call Golden Eagle and see how much boost you can get for $900. Stop acting like a child.

 

i was actually kinda serious about that JG engine dynamics long block, i emailed them for prices, but does anyone have any experience with that? if not i will just sleeve n do it all myself

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus &raquo;</TD></TR><TR><TD CLASS="quote">If AEBS is too expensive, get Golden Eagles and boost your "maximum 12psi" with $800 sleeves. Then when you turn the boost up to 16 because 12 feels "slow", you blow em out and wish you would've gone AEBS in the first place .</TD></TR></TABLE>

where did you make this up from? there are plenty of people making power on GE's...They wont' blow out @ 16psi

 

arturbo is right...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92lSilude &raquo;</TD></TR><TR><TD CLASS="quote">ok, i believe i already said fine i should go with the boosted sleeves instead, 900 for 30psi sleeves, yeah show me where i can do that is what im askin now you dumb ****</TD></TR></TABLE>

ban this jerk

 

ask a simple question and i get a bunch of smartasses and you wanna ban me... what the hell is that

 

can u guys post the websites where i can have a block sleeved ... thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Silverhatch &raquo;</TD></TR><TR><TD CLASS="quote">can u guys post the websites where i can have a block sleeved ... thanks</TD></TR></TABLE>

 

http://www.exospeed.com
here's the close deck version of the H22 sleeved.

don't have pics of the Open deck version uploaded, but its pretty much similar to Arturbo's pic

 

guees what block this is: