jrsc and hondata
Just use one of the nipples on the back of the JR manifold and about 8 inches of good vacuum hose. The MAP sensor will plug right into the hose. Hold it on with a zip-tie and then zip-tie the sensor itself to the firewall. My setup ran fine like this for many many miles. 
Sonny

Sonny
Thread
Thread Starter
Forum
Replies
Last Post
integra123
Forced Induction
3
Dec 7, 2005 03:29 PM
bxsi
Forced Induction
6
Jun 16, 2003 09:45 PM




