JRSC 10LBS of BOOST?
05-04-2006, 04:37 PM
#1
Thread Starter
Join Date: Feb 2006
Location: MPLS, MN, USA
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
JRSC 10LBS of BOOST?
How or what pulley can I use to push out 10lbs of boost to my JRSC? I have a d16z fully built motor and just want to see how much this motor can really take. Thanks
05-04-2006, 06:17 PM
#4
Re: JRSC 10LBS of BOOST? (sc4dr)
Good thing he thought out his poll before he made it..........
Do yourself a favor, and re-read your post and the options on the poll. Then put a pillow on your desk so it wont hurt so bad when you start banging your head off it.
If you want to make 10 lbs of boost, jackson racing should sell a pulley designed to do just that.
Do yourself a favor, and re-read your post and the options on the poll. Then put a pillow on your desk so it wont hurt so bad when you start banging your head off it.
If you want to make 10 lbs of boost, jackson racing should sell a pulley designed to do just that.
Trending Topics
05-05-2006, 06:55 AM
#8
Honda-Tech Member
Re: JRSC 10LBS of BOOST? (vulocity22)
I don't know why you made a poll....but to answer your questions.
The 8lb blower pulley and a CRV crank pulley will give you about 11psi on the Z6.
click the Payn link in my sig to see one of my old setups.
The 8lb blower pulley and a CRV crank pulley will give you about 11psi on the Z6.
click the Payn link in my sig to see one of my old setups.
Thread
Thread Starter
Forum
Replies
Last Post