<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1158 &raquo;</TD></TR><TR><TD CLASS="quote">Thanks James. </TD></TR></TABLE>
x2

 

 

check PM!!!!

6 months of waiting here
would like the rest of my downpipe!!!!!

 

James will deliver!!!

 

its doesn't take 6 months for 2 pieces of pipe mang. Its not my fault that you forgot to place it with the rest of my order..

 

after along wait...i finally got my Non A/C Log Style Manifold....GREAT QUALITY!!!! DEFINENTLY WORTH THE WAIT...thanks james for trying ur best to finish it when i needed it Manifold--&gt;

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RuthlessEF-9 &raquo;</TD></TR><TR><TD CLASS="quote">its doesn't take 6 months for 2 pieces of pipe mang. Its not my fault that you forgot to place it with the rest of my order..</TD></TR></TABLE>

Check pm

 

16 hours to weld together a log manifold?! i could make one way faster than that and i wouldnt havwe any jigs of any sort.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike93boost &raquo;</TD></TR><TR><TD CLASS="quote">16 hours to weld together a log manifold?! i could make one way faster than that and i wouldnt havwe any jigs of any sort.</TD></TR></TABLE>

I believe he backpurges all his welds and does two passes. Setting up all the **** for backpurging takes a little while longer than just welding it up and shitting up the inside of the manifold.

 

hey can you please email me with my manifold, if its done or started and i emailed you about the shipping address because it was wrong i really need to know what is going on hear i have missed 2 race events so farm, and the post says that you have about 2 weeks until you will start accepting orders again

44mm v-band
top-mount
t3 flange

cylkesmooth@hotmail.com


thank you i really want to use this manifold....

 

That 2 week time frame might be wrong
Right now I have a couple more guys that have been waiting an unnecessary long time (4-6 months ) that I am working at taking care of
I hope to have these guys orders shipping out next week friday or monday following
after them
I am back on the everyone else and should have it shipping in another week
This week I got out 6 log combos and 2 top mount combos
at the rate of work I had done this week I will be ready in the said 2-3 weeks
but note sometimes stuff happens and knocks me back (band saw breaking, material shortage)

-James

 

That time frame was for full combo orders (manifold, downpipe, dumptube all backpurged)
-James

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gunslinger &raquo;</TD></TR><TR><TD CLASS="quote">James will deliver!!!</TD></TR></TABLE>

Let me know how that new stuff comes out for you man, as you saw I put some real effort into making that new setup a bit nicer than before
-James

 

hey whats up james any word on the sidemount?

 

Bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike93boost &raquo;</TD></TR><TR><TD CLASS="quote">16 hours to weld together a log manifold?! i could make one way faster than that and i wouldnt havwe any jigs of any sort.</TD></TR></TABLE>

then why dont you go and get one-fabbed.. james at least take pride in his work to give you the best for your money, so dont come down on him im sure he will take care of you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by geezer_187 &raquo;</TD></TR><TR><TD CLASS="quote">Bump</TD></TR></TABLE>

Sorry didnt get yours out today as planned
I got stuck in traffic and ups closed 10 minutes b4 I made it there
Ships out first thing in the morning cause it is still in my trunk
-James

 

James any new updates on my setup? i'm the returned D16 log combo guy. Did you get started on my downpipe?

 

whats with all the customer service threads?

 

Got my tracking number today

 

HEY I'M JEALOUS I WANT ONE TOO

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DeLSoLo &raquo;</TD></TR><TR><TD CLASS="quote">hey whats up james any word on the sidemount?</TD></TR></TABLE>

 

i got my jg-fab items two months ago. i waited four months, the runners from manifold didnt fit with the holes in the flange, the downpipe was a solid half inch past where the A/C compressor would be (when i ordered an A/C compatible manifold/downpipe), and i've gone through a couple a/c compressors even after i had my local guy chop/redo the downpipe. because the manifold has my turbo seriously like three inches off the block, like two and half inches from my A/C condenser, (an inch away from my thin fan) and it's just too much heat on the A/C equipment. ill fitting and poorly made. anyways, the point of my post. i'm going to buy another manifold/downpipe from a guy here in town who will put my turbo near the block, like every other manifold i've ever seen. so if anyone wants a JG-fab b series log manifold/downpipe for a b-series and a gt28r, i'll be selling mine. pm me to get it sooner than james will get it to you.

 

You know you could have contacted me about thesed problems and I would have made you a new setup free of charge
Dont believe me ask a couple of other guys on here who have needed some warranty work like Billy
(George your setup ships out really soon )
-James

 

I am still working on yours
I keep running into problems with the primaries hitting the hood and what not,
at the moment I am having to tack up a entire setup, then go 3 hours out to my buddys place who has a del sol to mock it up, take notes on what isnt working, and start over again
I have done this 4 times now, I am hoping this 5th time will be my last
-James