JacksonRacing supercharger
Thread Starter
Honda-Tech Member
Joined: May 2015
Posts: 4
Likes: 0
JacksonRacing supercharger
I have a D16 ZC
jacksonracing supercharger built on my ca, yet to be engine started.. I have a few questions to anyone with a Js supercharger:
where is the hole that the oil goes through, a photo might help
also what kind of oil is needed to be use?
jacksonracing supercharger built on my ca, yet to be engine started.. I have a few questions to anyone with a Js supercharger:
where is the hole that the oil goes through, a photo might help
also what kind of oil is needed to be use?
Last edited by moshik1212; May 8, 2015 at 09:51 AM.
Who is Mr Robot?
iTrader: (2)
Joined: Jul 2004
Posts: 21,474
Likes: 10
From: ATL - Where the Pimps and Players dwell
Re: JacksonRacing supercharger
you mean like to oil the gear drive and snout?
Look for a hex plug on the front of the supercharger around the snout. A specific oil has to be used, look on ebay for a supercharger rebuild/oil kit... That's what you need, also depending on the age and mileage of your supercharger you might want to go on ahead and rebuild it with a new bushing for the snout drive.
also read here, the jrsc thread.
https://honda-tech.com/forced-induct...nning-1214810/
Look for a hex plug on the front of the supercharger around the snout. A specific oil has to be used, look on ebay for a supercharger rebuild/oil kit... That's what you need, also depending on the age and mileage of your supercharger you might want to go on ahead and rebuild it with a new bushing for the snout drive.
also read here, the jrsc thread.
https://honda-tech.com/forced-induct...nning-1214810/
Thread
Thread Starter
Forum
Replies
Last Post
rudyndrew
Honda CRX / EF Civic (1988 - 1991)
6
Jul 22, 2011 04:56 PM