i sort of have another noob question since im new to the honda world how can i run my hardpiping in my bay like the dynamic performance ek? i like how it looks running under the rad than through the fender well.

 

for your vacuum lines? you can run whatever you want if you want to deal with taking the time to make it work properly

 

no like how can i run my actual intercooler piping under the rad instead of running it through my wheel well? its hard to explain lol

 

Depending on he placement of the intercooler and were the outlet will exit, you may have to trim or cut out the core support OR you may be able to get away with re-position the radiator to clear the intercooler pipe. Obviously you will have to use a backdoor style intercooler to make this work..

 

yeah i understand ive just been seeing people doing it and i didnt know if i have to reposition the radiator or not but thanks for the feedback

 

what is that equation right there??

I'm assuming 2" OD piping with ~.25" sidewall

so ID is ~1.57???

please explain... I have access to .125" sidewall piping so this equation would then change??

 

2" OD with a 0.25" wall will give you 1.50" ID +/- 0.010".

 

Don't really know where that equation is coming from to get area, because equation for the area of a circle is not that.

A = (pi)r^2

Funny thing is that it still comes out to be the same number, lol.

 

.25" wall!!! That's ****ing huge! Aluminum IC piping is .0625" (1/16" or 16ga).

2" pipe is not 2" OD. 2" tube is 2" OD.

 

thats what I was thinking, since I have 1/8" side wall sitting right here and havent seen anything larger, I'm trying to figure out what that equation is for...

1.57 * 2 = 3.14 sq in

3.9740625 sq in = 1.98703125 x 2

5.9365625 sq in = 2.96828125 x 2

7.065 sq in = 3.5325 x 2

 

its 2018...and i got to this thread thru google lol