Intercooler Piping
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Feb 2005
Posts: 938
Likes: 0
From: mashin down the freeway, CA, USA
Intercooler Piping
I was wondering if anyone here happens to know what degree bends to get so that I can make intercooler piping for my 91 integra.
setup ill be running:
-stock ls intake manifold
-spearco intercooler from a drag kit
-jdm front bumper support
-battery relocated
-must keeping ac
-inlinepro log manifold
-sc50 turbo cold side facing passenger side out to intercooler facing down
I am willing to cut into the frame for less bends or easy routing, I am not willing to sacrafice ac/powersteering
Sorry if the question is kinda vague i just need an idea of what to buy.
Thanks,
Jason
setup ill be running:
-stock ls intake manifold
-spearco intercooler from a drag kit
-jdm front bumper support
-battery relocated
-must keeping ac
-inlinepro log manifold
-sc50 turbo cold side facing passenger side out to intercooler facing down
I am willing to cut into the frame for less bends or easy routing, I am not willing to sacrafice ac/powersteering
Sorry if the question is kinda vague i just need an idea of what to buy.
Thanks,
Jason
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Feb 2005
Posts: 938
Likes: 0
From: mashin down the freeway, CA, USA
Re: Intercooler Piping (Adriano)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Adriano »</TD></TR><TR><TD CLASS="quote">Your best bet is to look the car and figure out yourself. It's very simple.
Adriano</TD></TR></TABLE>
thats pretty much what i was going to do. just didnt know if anyone happened to know the specs off the top of their head
Adriano</TD></TR></TABLE>
thats pretty much what i was going to do. just didnt know if anyone happened to know the specs off the top of their head
Thread
Thread Starter
Forum
Replies
Last Post