How Many People Use Girdle on Their 700whp Cars?
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
How Many People Use Girdle on Their 700whp Cars?
I have B20 which will be going in my car shortly. I have arp main studs in it right now. I wanted to know if I should put GSR or ERL main girdle in it. I have the gsr one laying around and erl goes for around $500. I want to make over 700whp+.
Here is my setup:
B20vtec cp 9:0:1
Manley rods
Gsr built head
custom intake manifold w/velocity stacks
68mm TB
precision 1600cc injectors
AEM 5 bar map
arp mains, head
CTR cams
PMS T4 top mount turbo manifold
Precision GT4067
precision 750 IC
4" downpipe
4" exhaust
B16 trans
OBX lsd
twin disk competion clutch
Prodrive stage 2 axles with bigger hubs
Aeromotive 1000hp pump
Aeromotive regulator
full race sump
-8an feed
Here is my setup:
B20vtec cp 9:0:1
Manley rods
Gsr built head
custom intake manifold w/velocity stacks
68mm TB
precision 1600cc injectors
AEM 5 bar map
arp mains, head
CTR cams
PMS T4 top mount turbo manifold
Precision GT4067
precision 750 IC
4" downpipe
4" exhaust
B16 trans
OBX lsd
twin disk competion clutch
Prodrive stage 2 axles with bigger hubs
Aeromotive 1000hp pump
Aeromotive regulator
full race sump
-8an feed
#4
Junior Member
iTrader: (1)
Join Date: Nov 2003
Location: baltimore,maryland, md, usa
Posts: 831
Likes: 0
Received 0 Likes
on
0 Posts
Re: How Many People Use Girdle on Their 700whp Cars? (Turbocivic94)
im getting ready to have erl build my motor soon and they will be putting the girdle on it. looking to make same power. was making 650 with the gt4067
#5
Honda-Tech Member
Re: How Many People Use Girdle on Their 700whp Cars? (dome)
I say yes, those ERL girdles are very nice. Give Sean a call at ERL and he would be happy to explain why they reccomend these. Honda implemented a form of this on the K series engines with the split crank case. Im sure it was done for a reason.
Trending Topics
#10
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: How Many People Use Girdle on Their 700whp Cars? (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">Looks like a nice setup and build. Question. Is the block resleeved?</TD></TR></TABLE>
Block has darton sleeves in it. Only reason I ask cause its gonna set me back a little on getting the car done.
I will be pushing close to 40 psi and whatever power I make.
I just dont want to go through bearings. I do have arp main studs in there now.
my GT4067 has .81 a/r
Block has darton sleeves in it. Only reason I ask cause its gonna set me back a little on getting the car done.
I will be pushing close to 40 psi and whatever power I make.
I just dont want to go through bearings. I do have arp main studs in there now.
my GT4067 has .81 a/r
#12
Honda-Tech Member
Thread Starter
Join Date: Jan 2003
Location: CT, USA
Posts: 5,002
Likes: 0
Received 0 Likes
on
0 Posts
Re: How Many People Use Girdle on Their 700whp Cars? (99Hybrid_Hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99Hybrid_Hatch »</TD></TR><TR><TD CLASS="quote">I dont run a girdle but Iam on a dart block..</TD></TR></TABLE>
I think dart blocks have stronger and bigger main caps. I think they're different material than factory.
I think dart blocks have stronger and bigger main caps. I think they're different material than factory.
Thread
Thread Starter
Forum
Replies
Last Post
ricardo13d
All Motor / Naturally Aspirated
18
11-25-2010 09:00 PM
Boostedb20EH2
Forced Induction
2
07-25-2008 08:43 AM