How do I figure this out?

Thread Tools
 
Search this Thread
 
Old Jan 22, 2002 | 11:46 PM
  #1  
Charles B.'s Avatar
Thread Starter
Honda-Tech Member
 
Joined: Oct 2001
Posts: 2,785
Likes: 0
From: So Cal
Default How do I figure this out?

If an Integra GSR turbo can run a 12.81@106.24mph, how would that translate in to my car with the same motor? I drive a 93 CX. That Integra, according to the December 2000 issue of Turbo mag, ran a basic GReddy turbo kit with test pipe and some prototype Hoosier slicks. The Integra also made 256 whp at .70 kg/cm boost. So far I have to motor and plan to get the GReddy kit. So, given that I have the same motor, turbo kit, a test pipe, and a good pair of slicks, what times should I be expecting from the same amount of boost and setup in my EG?
Reply
Old Jan 23, 2002 | 12:16 AM
  #2  
D-SPEED's Avatar
Honda-Tech Member
 
Joined: May 2001
Posts: 889
Likes: 0
From: Okayama, Japan
Default Re: How do I figure this out? (SuperDuperEG)

i would estimate roughly .5-.7 seconds going from a 2650 lb GSR to a ~2000 lb hatch. I figure this seeing as how a GSR w I/H/E can run ~ 15 flat (sometimes less sometimes more) and you often see EG GSRs with those mods running mid to low 14s. just my estimate
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
B_1_8_hatch
Forced Induction
16
Jul 1, 2003 04:48 PM
falcongsr
Forced Induction
23
Oct 15, 2002 11:56 PM
gsr9901
Acura Integra
5
Jul 9, 2002 05:01 AM
Anoesis
Acura Integra
2
May 11, 2002 07:23 PM
teamnvisible
Forced Induction
3
Mar 22, 2002 09:05 PM




All times are GMT -8. The time now is 09:42 PM.